Automatic Thread Insertion Kit Sewing (ATIKs) device for vocational fashion design student: Practical sewing application

Wan Nurlisa Wan Ahmad

Abstract

The incorporation of technology is a consistent aspect of education, which is widely advanced through teaching and learning (T&L) in the industrial revolution 4.0 (IR 4.0) education technology. In this study, an automatic thread insertion set for sewing (ATIKs) was developed. The ATIKs device improves students' understanding and facilitates the process of sewing in fashion design subjects for high school curriculum. The device was programmed using an Arduino microcontroller board and open source Arduino software (IDE). The CDIO model is used as the basis for product development, which includes the steps from conception to design, implementation, and operation. The development for this product consists of the main components standard needle size, automatic thread, Arduino UNO R3, stepper motor, coil, and Arduino coding to control the movement. In addition, this product is relatively portable with its dimensions of 7 x 7 x 10 cm. A qualitative research method was applied using a list of interview protocols validated by five professional experts in the field. Based on the open-ended questions, the experts indicated that this product facilitates the criteria of the T&L process, improves understanding of the use of the thread needle, and increases student confidence in the sewing process. In the future, this kit could be integrated into an automated control system. This research development can help develop teaching tools that further increase student safety and improve student skills and cleanliness in handling sewing tools during hands-on work. © 2024, Semarak Ilmu Publishing. All rights reserved.

References

Yuan, Philip F., Hua Chai, Chao Yan, and Neil Leach. Proceedings of the 2021 DigitalFUTURES: The 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021). Springer Nature, 2022. https://doi.org/10.1007/978-981-16-5983-6.

Eladly, Amira Mohamed, Mohamed Gaber Abou-Ali, Aida Mohamed Sheta, and Sherwet Hussein EL-Ghlomy. "A flexible ergonomic redesign of the sewing machine workstation." Research Journal of Textile and Apparel 24, no. 3 (2020): 245-265. https://doi.org/10.1108/RJTA-10-2019-0050.

Kiong, Tee Tze, Alvy Wendyline Florentius, Mariam Abu, Dalilah Mohd Rubi, Suriani Mohamed, Yee Mei Heong, and Mimi Mohaffyza Mohamad. "Tahap penguasaan teori dan amali dalam kalangan pelajar ekonomi rumah tangga: Kajian persepsi di universiti awam (Malaysia Theoretical and practical command of Malaysia's home economics students: A perception study from a public university)." Malaysian Journal of Society and Space 12, no. 3 (2016): 79-87.

Saim, Aishah, Saharuddin Talib, and Ibrahim Burhan. "The Effectiveness of the Electro-Pneumatic Trainer Embedded with PIC and Visual Basic Platform for Educational Purposes." Asian Journal of Vocational Education And Humanities 2, no. 2 (2021): 1-7. https://doi.org/10.53797/ajvah.v2i2.1.2021.

Fauzi, Muhammad, Amir Hasan, and Vera Oktari. "Determinan Auditor Switching Pada Perusahaan Finance Yang Terdaftar Di BEI." Jurnal Kajian Akuntansi dan Bisnis Terkini, Fakultas Ekonomi Dan Bisnis, Universitas Riau, Pekanbaru 1, no. 1 (2020): 89-105. https://doi.org/10.31258/jc.1.1.89-105.

Ismail, Zawawi, Ab Halim Tamuri, N. M. R. N. Yusoff, and Mohd Ala-Uddin Othman. "Teknik pengajaran kemahiran bertutur bahasa arab di SMKA di Malaysia." GEMA Online® Journal of Language Studies 11, no. 2 (2011): 67-82.

Nashir, Irdayanti Mat, Ainall Yaqeen Darina Zainal, and Aishah Sulaiman. "Pembangunan Modul Multimedia Interaktif bagi Pembelajaran Sains Rumah Tangga Sekolah Menengah Harian di Malaysia." Asian Pendidikan 2, no. 1 (2022): 8-17.

Azman, Mohamed Nor Azhari, Nur Amierah Azli, Ramlee Mustapha, Balamuralithara Balakrishnan, and Nor Kalsum Mohd Isa. "Penggunaan alat bantu mengajar ke atas guru pelatih bagi topik kerja kayu, paip dan logam." Sains Humanika 3, no. 1 (2014): 77-85.

Mehta, Nirav J., Ketan Jani, and Ijaz A. Khan. "Clinical usefulness and prognostic value of elevated cardiac troponin I levels in acute pulmonary embolism." American Heart Journal 145, no. 5 (2003): 821-825. https://doi.org/10.1016/S0002-8703(02)94704-6.

Susilo, Tri. "Aplikasi Gugus Kendali Mutu (Quality Control Circle) Dengan Menggunakan Deming Prize Untuk Mengendalikan Dan Meningkatkan Mutu Produk Di Koperasi Intako." Tekmapro: Journal of Industrial Engineering and Management 2, no. 1 (2012).

Uemuraa, Kaito, Takumi Sasakia, and Yuhki Kitazonoa. "Improvement of the Movement Speed of Tying Fishing Line Automatically." In Proceedings of the 8th IIAE International Conference on Industrial Application Engineering, pp. 56-60. 2020. https://doi.org/10.12792/iciae2020.013.

Fiet, James O. "The pedagogical side of entrepreneurship theory." Journal of Business Venturing 16, no. 2 (2001): 101-117. https://doi.org/10.1016/S0883-9026(99)00042-7.

Koskinen, Anniina, Pirita Seitamaa-Hakkarainen, and Kai Hakkarainen. "Interaction and embodiment in craft teaching." Techne Series: Research in Sloyd Education and Craft Science A (2015).

Schwichow, Martin, Corinne Zimmerman, Steve Croker, and Hendrik Härtig. "What students learn from hands‐on activities." Journal of Research in Science Teaching 53, no. 7 (2016): 980-1002. https://doi.org/10.1002/tea.21320.

Chan, Cecilia Ka Yuk. "Exploring an experiential learning project through Kolb's Learning Theory using a qualitative research method." European Journal of Engineering Education 37, no. 4 (2012): 405-415. https://doi.org/10.1080/03043797.2012.706596.

Subramony, Deepak Prem, Michael Molenda, Anthony K. Betrus, and Will Thalheimer. "The mythical retention chart and the corruption of Dale's cone of experience." Educational Technology (2014): 6-16.

Yunus, Jailani Md, Maizam Alias, Marina Ibrahim Mukhtar, Lee Ming Foong, Tee Tze Kiong, Siti Nur Kamariah Rubani, Faizal Amin Nur Yunus, Hashima Hamid, Junita Sulaiman, and Sri Sumarwati. "Validity of vocational pedagogy constructs using the rasch measurement model." Journal of Technical Education and Training 9, no. 2 (2017).

Aji, Sudi Dul, Muhammad Nur Hudha, Choirul Huda, Asep Bayu Dani Nandiyanto, and Ade Gafar Abdullah. "The improvement of learning effectiveness in the lesson study by using e-rubric." Journal of Engineering Science and Technology 13, no. 5 (2018): 1181-1189.

Gorschek, Tony, Per Garre, Stig Larsson, and Claes Wohlin. "A model for technology transfer in practice." IEEE Software 23, no. 6 (2006): 88-95. https://doi.org/10.1109/MS.2006.147.

Chao, Chih‐Yang, Yuan‐Tai Chen, and Kuei‐Yu Chuang. "Exploring students' learning attitude and achievement in flipped learning supported computer aided design curriculum: A study in high school engineering education." Computer Applications in Engineering Education 23, no. 4 (2015): 514-526. https://doi.org/10.1002/cae.21622.

Coil, David, Mary Pat Wenderoth, Matthew Cunningham, and Clarissa Dirks. "Teaching the process of science: faculty perceptions and an effective methodology." CBE-Life Sciences Education 9, no. 4 (2010): 524-535. https://doi.org/10.1187/cbe.10-01-0005.

Reddy, Y. Malini, and Heidi Andrade. "A review of rubric use in higher education." Assessment & Evaluation in Higher Education 35, no. 4 (2010): 435-448. https://doi.org/10.1080/02602930902862859.

Abdullah, Raja Nazim, Junaidah Abdul Muait, and Ganefri Ganefri. "Students' perception towards modern technology as teaching Aids." Asian Journal of Assessment in Teaching and Learning 9, no. 2 (2019): 37-42. https://doi.org/10.37134/ajatel.vol9.no2.5.2019.