UPSI Digital Repository (UDRep)
|
UPSI Digital Repository (UDRep)
|
|
|
| ||||||||||||||||
| Full Text : |
| Ultrasonic insertion technique (IT) is an ultrasonic technique which involves sample immersion in a solution to determine its acoustic properties. IT is normally used to determine the acoustic properties of a medical phantom. We proposed the use of IT as an alternative technique to the common contact ultrasonic technique: through-transmission technique (TT) for determining the elastic constant of hardwoods in longitudinal, tangential and radial directions. The elastic constant of twelve rectangular-shaped Malaysian hardwoods from three different categories; heavy, medium and light with the density ranging from 602 to 992 kg m-3 were determined using IT and TT. Both techniques were carried out at 24.0°C surrounding temperature and utilized 2.25 MHz ultrasonic transducers. Data from both techniques were compared to validate the use of the proposed technique. Findings indicated that IT offers consistent and accurate results for, tangential and radial elastic constants (TEC and REC) within 8.89% and 5.86% differences, respectively compared to TT for all tested hardwoods. IT offers an alternative technique for TEC and REC determinations of precious wood samples. |
| References |
[1] V. Bucur, R.R. Archer, Elastic constants for wood by an ultrasonic method, Wood Sci. Technol. 18 (1984) 255–265.
[2] F.G.R. de Oliveira, J.A.O. de Campos, A. Sales, Ultrasonic measurements in Brazilian hardwood, Mater. Res. 5 (2002) 51–55.
[3] W.T. Simpson, Relationship between speed of sound and moisture content of Red Oak and Hard Maple during drying, Wood Fiber Sci. 30 (1998) 405–413.
[4] M.D. Nazihah, S. Kadri, M.I.H. Yaacob, J. Rosly, Computerized acoustical characterization system of medical phantoms, AIP Conf. Proc. 1528 (2013) 406–411.
[5] K. Zell, J.I. Sperl, M.W. Vogel, R. Niessner, C. Haisch, Acoustical properties of selected tissue phantom materials for ultrasound imaging, Phys. Med. Biol. 52
(2007) N475–N484.
[6] E.E. Franco, J.M. Meza, F. Buiochi, Measurement of elastic properties of materials by the ultrasonic through-transmission technique, Dyna 78 (2011) 58–64.
[7] B. Abell, S. Shao, L. Pyrak-Nolte, Measurements of elastic constants in anisotropic media, Geophysics 79 (2014) D349–D362.
[8] D.W. Green, J.E. Winandy, D.E. Kretschmann, Chapter 4: Mechanical properties of wood, in: Wood Handbook: Wood as an Engineering Material, Forest Products Society, United States, 1999, pp. 4-1–4-19.
[9] W. Toong, J. Ratnasingam, M.K.M. Roslan, R. Halis, The prediction of wood properties from anatomical characteristics: the case of common commercial
Malaysian timbers, BioResources 9 (2014) 5184–5197.
[10] S. Dahmen, H. Ketata, M.H. Ben Ghozlen, B. Hosten, Elastic constants measurement of anisotropic Olivier wood plates using air-coupled transducers generated Lamb wave and ultrasonic bulk wave, Ultrasonics 50 (2010) 502–507.
[11] J. Björnberg, A Comparison of Non-Destructive Techniques to Discover Defect Finger Joints in Furniture, Linnaeus University, Sweden, 2014.
[12] J.I. Mohammad, N. Johari, M.H. Fouladi, Numerical investigation on the sound absorption coefficients of Malaysian wood, in: Proceedings of 20th International Congress on Acoustics (ICA 2010), Sydney, Australia, August 23–27, 2010, pp. 1–7.
[13] MTC Wood Wizard, 2016. |
| This material may be protected under Copyright Act which governs the making of photocopies or reproductions of copyrighted materials. You may use the digitized material for private study, scholarship, or research. |