UPSI Digital Repository (UDRep)
Start | FAQ | About

QR Code Link :

Type :article
Subject :QD Chemistry
ISSN :2191-4281
Main Author :Abdullah Arman Shah, - S. Izman2, Abdul Kadir Mohammed Rafiq, - H. Mas-Ayu,
Title :Influence of substrate temperature on adhesion strength of TiN coating of biomedical Ti-13Zr-13Nb alloy
Place of Production :CrossMark
Year of Publication :2017

Full Text :
Adhesion strength between the coating and the substrate is considered as a significant factor, which may help determine both the successful implantation and the long-term stability of any coated implant. A weakly adhered coating on a medical implant may delaminate after the process of implantation, which in turn may severely limit the effectiveness along with the life of the implant itself. Related previous studies have shown that process parameters may have a direct influence on the quality of TiN coating. In the present work, the effect of substrate temperature on adhesion strength of TiN coating on Ti–13Zr–13Nb biomedical grade alloy was investigated. The coating parameter, which varied in this study, was the substrate temperature (i.e., 100, 200 and 300 ◦C). The adhesion strength of TiN coating was examined by means of scratch testing method. In addition, calibrated optical images were also used to verify the total coating failures on the scratched coated samples. Results indicated that an increase observed in the substrate temperature may have resulted in a decrease in the microdroplet form on TiN coating. In contrast, the adhesion strength of TiN coating was observed to equally increase when substrate temperature increased. It is believed that the higher mobility of atom at a higher substrate temperature (i.e., 300 ◦C) filling

References
1. Xiao, M.; Chen, Y.M.; Biao, M.N.; Zhang, X.D.; Yang, B.C.: Bio-functionalization of biomedical metals. Mater. Sci. Eng. C 70(Part 2), 1057–1070 (2017). doi: 10.1016/j.msec.2016.06.067 2. Okulov, I.V.; Volegov, A.S.; Attar, H.; Bönisch, M.; Ehtemam-Haghighi, S.; Calin, M.; Eckert, J.: Composition optimization of low modulus and high-strength TiNb-based alloys for biomedical applications. J. Mech. Behav. Biomed. Mater 65, 866–871 (2017). doi: 10.1016/j.jmbbm.2016.10.013 3. Nazari, K.A.; Nouri, A.; Hilditch, T.: Mechanical properties and microstructure of powder metallurgy Ti–xNb–yMo alloys for implant materials. Mater. Des. 88, 1164–1174 (2015). doi: 10.1016/j.matdes.2015.09.106 4. Geetha, M.; Singh, A.K.; Asokamani, R.; Gogia, A.K.: Ti based biomaterials, the ultimate choice for orthopaedic implants—a review. Prog. Mater. Sci. 54(3), 397–425 (2009) 5. Majumdar, P.; Singh, S.B.; Chakraborty, M.: Wear response of heat-treated Ti–13Zr–13Nb alloy in dry condition and simulated body fluid. Wear 264(11–12), 1015–1025 (2008) 6. Ricci, R.; Leite, N.C.S.; da-Silva, N.S.; Pacheco-Soares, C.; Canevari, R.A.; Marciano, F.R.; Webster, T.J.; Lobo, A.O.: Graphene oxide nanoribbons as nanomaterial for bone regeneration: effects on cytotoxicity, gene expression and bactericidal effect. Mater. Sci. Eng. C 78, 341–348 (2017). doi: 10.1016/j.msec.2017.03.278 7. Shah, A.; Izman, S.; Hassan, M.A.: Influence of nitrogen flow rate in reducing tin microdroplets on biomedical Ti–13Zr–13Nb alloy. Jurnal Teknologi 78(5–10), 6–10 (2016). doi: 10.11113/jt.v78.8825 8. Shah, A.; Izman, S.; Fasehah, S.N.: Study on micro droplet reduction on tin coated biomedical Ti–13Zr–13Nb alloy. Jurnal Teknologi 78(5–10), 1–5 (2016). doi: 10.11113/jt.v78.8824 9. Qin, L.; Yi, H.; Kong, F.; Ma, H.; Guo, L.; Tian, L.; Tang, B.: Effect of plasma molybdenized buffer layer on adhesive properties of TiN film coated on Ti6Al4V alloy. Appl. Surf. Sci. 403, 464–471 (2017). doi: 10.1016/j.apsusc.2017.01.122 10. Sathish, S.; Geetha, M.; Aruna, S.T.; Balaji, N.; Rajam, K.S.; Asokamani, R.: Sliding wear behavior of plasma sprayed nanoceramic coatings for biomedical applications. Wear 271, 934–941 (2011) 11. Cassar, G.; Wilson, J.C.A.-B.; Banfield, S.; Housden, J.; Matthews, A.; Leyland, A.: A study of the reciprocating-sliding wear performance of plasma surface treated titanium alloy. Wear 269(1–2), 60–70 (2010) 12. Sun, Q.; Hu, T.; Fan, H.; Zhang, Y.; Hu, L.: Thermal oxidation behavior and tribological properties of textured TC4 surface: influence of thermal oxidation temperature and time. Tribol. Int. 94, 479–489 (2016). doi: 10.1016/j.triboint.2015.10.013 13. Lacefeld, W.R.: Hydroxylapatite coatings. In: Hench, L.L., Wilson, J.L. (eds.) Introduction to Bioceramics, pp. 223–238. World Scientific Publishing Co.Pte.Ltd, London (1999) 14. Hoseini, M.; Jedenmalm, A.; Boldizar, A.: Tribological investigation of coatings for artificial joints. Wear 264(11–12), 958–966 (2008) 15. Nolan, D.; Huang, S.W.; Leskovsek, V.; Braun, S.: Sliding wear of titanium nitride thin films deposited on Ti–6Al–4V alloy by PVD and plasma nitriding processes. Surf. Coat. Technol. 200(20–21), 5698–5705 (2006) 16. Sathish, S.; Geetha, M.; Pandey, N.D.; Richard, C.; Asokamani, R.: Studies on the corrosion and wear behavior of the laser nitrided biomedical titanium and its alloys. Mater. Sci. Eng. C 30(3), 376–382 (2010) 17. Kim, W.-G.; Choe, H.-C.: Effects of TiN coating on the corrosion of nanostructured Ti–30Ta–xZr alloys for dental implants. Appl. Surf. Sci. 258(6), 1929–1934 (2012) 18. Subramanian, B.; Ananthakumar, R.; Jayachandran, M.: Structural and tribological properties of DC reactive magnetron sputtered titanium/titanium nitride (Ti/TiN) multilayered coatings. Surf. Coat. Technol. 205(11), 3485–3492 (2011) 19. Subramanian, B.; Jayachandran, M.: Electrochemical corrosion behavior of magnetron sputtered TiN coated steel in simulated bodily fluid and its hemocompatibility. Mater. Lett. 62(10–11), 1727–1730 (2008) 20. Choe, H.C.; Lee, C.H.; Jeong, Y.H.; Ko, Y.M.; Son, M.K.; Chung, C.H.: Fatigue fracture of implant system using TiN and WC coated abutment screw. Proc. Eng. 10, 680–685 (2011) 21. Vadiraj, A.; Kamaraj, M.: Characterization of fretting fatigue damage of PVD TiN coated biomedical titanium alloys. Surf. Coat. Technol. 200(14–15), 4538–4542 (2006) 22. Vadiraj, A.; Kamaraj, M.: Effect of surface treatments on fretting fatigue damage of biomedical titanium alloys. Tribol. Int. 40(1), 82–88 (2007) 23. Stallard, J.; Poulat, S.; Teer, D.G.: The study of the adhesion of a TiN coating on steel and titanium alloy substrates using a multi-mode scratch tester. Tribol. Int. 39(2), 159–166 (2006) 24. Kelly, P.J.; vom Braucke, T.; Liu, Z.; Arnell, R.D.; Doyle, E.D.: Pulsed DC titanium nitride coatings for improved tribological performance and tool life. Surf. Coat. Technol. 202(4–7), 774–780 (2007) 25. Gerth, J.; Wiklund, U.: The influence of metallic interlayers on the adhesion of PVD TiN coatings on high-speed steel. Wear 264(9–10), 885–892 (2008) 26. Kataria, S.; Kumar, N.; Dash, S.; Ramaseshan, R.; Tyagi, A.K.: Evolution of deformation and friction during multimode scratch test on TiN coated D9 steel. Surf. Coat. Technol. 205(3), 922–927 (2010) 27. Mohseni, E.; Zalnezhad, E.; Bushroa, A.R.; Abdel Magid, H.; Goh, B.T.; Yoon, G.H.: Ti/TiN/HA coating on Ti–6Al–4V for biomedical applications. Ceram. Int. 41(10, Part B), 14447–14457 (2015). doi: 10.1016/j.ceramint.2015.07.081 28. Subramanian, B.; Ashok, K.; Jayachandran, M.: Effect of substrate temperature on the structural properties of magnetron sputtered titanium nitride thin films with brush plated nickel interlayer on mild steel. Appl. Surf. Sci. 255(5, Part 1), 2133–2138 (2008) 29. Mubarak, A.; Hamzah, E.; Toff, M.R.M.: Study of macrodroplet and growth mechanisms with and without ion etchings on the properties of TiN coatings deposited on HSS using cathodic arc physical vapour deposition technique. Mater. Sci. Eng. A 474(1–2), 236–242 (2008) 30. Bull, S.J.; Rickerby, D.S.: Failure modes in scratch adhesion testing: some observations. In: Bhat, T.S.S.a.D.G. (ed.) Proceedings of the 3rd International Conference, Minerals, Metals and Materials Society, Warrendale, pp. 153–169 (1990) 31. Farè, S.; Lecis, N.; Vedani, M.; Silipigni, A.; Favoino, P.: Properties of nitrided layers formed during plasma nitriding of commercially pure Ti and Ti–6Al–4V alloy. Surf. Coat. Technol. 206(8–9), 2287–2292 (2012). doi: 10.1016/j.surfcoat.2011.10.006

This material may be protected under Copyright Act which governs the making of photocopies or reproductions of copyrighted materials.
You may use the digitized material for private study, scholarship, or research.

Back to previous page

Installed and configured by Bahagian Automasi, Perpustakaan Tuanku Bainun, Universiti Pendidikan Sultan Idris
If you have enquiries, kindly contact us at pustakasys@upsi.edu.my or 016-3630263. Office hours only.