UPSI Digital Repository (UDRep)
Start | FAQ | About

QR Code Link :

Type :article
Subject :Q Science (General)
Main Author :Arman Shah Abdullah
Additional Authors :Siti Norsuraya Hussain
Mas Ayu Hassan
Rosdi Daud
Andril Arafat
Fauzi Ahmad
Title :A review on wear and corrosion behavior of thermal oxidation on titanium-based alloy for biomedical application
Place of Production :Tanjong Malim
Publisher :Fakulti Teknikal dan Vokasional
Corporate Name :Universiti Pendidikan Sultan Idris

Abstract : Universiti Pendidikan Sultan Idris
The surface modification technique has been reckoned as a potential approach in addressing and improving several properties in materials, such as chemical and phase compositions, thickness, morphology, and structure. Thermal oxidation treatment in air is a modification technique that has been widely applied, mainly because it is low in cost and it can easily enhance the properties by influencing both the structure and the properties of the material surface layer. As such, this paper looked into the technique of thermal oxidation treatment to enhance the aspects of wear and corrosion resistance against titanium-based alloy (Ti-based alloy) for biomedical application, such as for surgical implants. Ti and its alloys appear to be the most suitable materials for implants due to their low wear and corrosion resistance characteristics in body fluid, thus resulting in the release of non-compatible metal ions by the implants into the human body. Hence, treatment parameters should be weighed in and adjusted to attain optimum microstructure towards improving the surface characteristics of Ti alloys

References

[1] Mohammed, Mohsin Talib, Zahid A. Khan, and Arshad Noor Siddiquee. "Surface modifications of titanium materials for developing corrosion behavior in human body environment: a review." Procedia Materials Science 6 (2014): 1610-1618.

[2] Kumar, Satendra, TSN Sankara Narayanan, S. Ganesh Sundara Raman, and S. K. Seshadri. "Thermal oxidation of CP Ti: Evaluation of characteristics and corrosion resistance as a function of treatment time." Materials Science and Engineering: C 29, no. 6 (2009): 1942-1949.

[3] Boretos, John W., and Murray Eden. "Contemporary biomaterials: material and host response, clinical applications, new technology and legal aspects." (1984): 209.

[4] Mallaiah Manjaiah, Rudolph Frans Laubscher.”A Review of the Surface Modifications of Titanium Alloys for Biomedical Application”. Materials Technology (2017): 1580-2949.

[5] Izman, S., A. Shah, Mohammed Rafiq Abdul Kadir, E. M. Nazim, Mahmood Anwar, M. A. Hassan, and Habib Safari. "Effect of thermal oxidation temperature on rutile structure formation of biomedical TiZrNb alloy." In Advanced Materials Research, vol. 393, pp. 704-708. Trans Tech Publications, 2012.

[6] Güleryüz, Hasan, and Hüseyin Çimeno?lu. "Effect of thermal oxidation on corrosion and corrosion–wear behaviour of a Ti–6Al–4V alloy." Biomaterials 25, no. 16 (2004): 3325-3333.

[7] Uwais, Zahid A., Mohamed A. Hussein, M. Abdul Samad, and Naser Al-Aqeeli. "Surface modification of metallic biomaterials for better tribological properties: A review." Arabian Journal for Science and Engineering 42, no. 11 (2017): 4493-4512.

[8] Dong, H., and T. Bell. "Enhanced wear resistance of titanium surfaces by a new thermal oxidation treatment." Wear 238, no. 2 (2000): 131-137.

[9] Breme, J., E. Eisenbarth, and V. Biehl. "Titanium and its alloys for medical applications." Titanium and Titanium Alloys: Fundamentals and Applications (2003): 423-451.

[10] Krishna, D. Siva Rama, and Y. Sun. "Effect of thermal oxidation conditions on tribological behaviour of titanium films on 316L stainless steel." Surface and Coatings Technology 198, no. 1-3 (2005): 447-453.

[11] Krishna, D. Siva Rama, Y. L. Brama, and Y. Sun. "Thick rutile layer on titanium for tribological applications." Tribology International 40, no. 2 (2007): 329-334.

[12] Bloyce, A., P-Y. Qi, H. Dong, and T. Bell. "Surface modification of titanium alloys for combined improvements in corrosion and wear resistance." Surface and Coatings Technology 107, no. 2-3 (1998): 125-132.

[13] Kumar, S., Narayanan, T. S. N. S., Raman, S. G. S. & Seshadri, S. K. “Thermal oxidation of CP Ti - An electrochemical and structural characterization”. Materials Characterization 61 (2010): 589–597.

[14] Ashrafizadeh A. & Ashrafizadeh F. “ Structural features and corrosion analysis of thermally oxidized titanium”. Journal of Alloys and Compounds 480, No.2 (2009): 849–852.

[15] Dalili, N., A. Edrisy, K. Farokhzadeh, J. Li, J. Lo, and A. R. Riahi. "Improving the wear resistance of Ti–6Al–4V/TiC composites through thermal oxidation (TO)." Wear 269, no. 7-8 (2010): 590-601.

[16] Bolat, Georgiana, Javier Izquierdo, Daniel Mareci, Daniel Sutiman, and Ricardo M. Souto. "Electrochemical characterization of ZrTi alloys for biomedical applications. Part 2: The effect of thermal oxidation." Electrochimica Acta 106 (2013): 432-439.

[17] Velten, D., V. Biehl, F. Aubertin, B. Valeske, W. Possart, and J. Breme. "Preparation of TiO2 layers on cp?Ti and Ti6Al4V by thermal and anodic oxidation and by sol?gel coating techniques and their characterization." Journal of Biomedical Materials Research: An Official Journal of The Society for Biomaterials and The Japanese Society for Biomaterials 59, no. 1 (2002): 18-28.

[18] Mas-Ayu, H., Rosdi Daud, Arman Shah, H. M. Hazwan, Siti Haryani Tomadi, and M. S. Salwani. "Effect of Thermal Oxidation and Carbon Concentrations on Co-Cr-Mo Alloy in Enhanced Corrosion Protection." In Materials Science Forum, vol. 916, pp. 170-176. Trans Tech Publications, 2018.

[19] Krzysztof Anio?ek, Marian Kupka and Adrian Barylski. “Characteristics of the tribological properties of oxide layers obtained via thermal oxidation on titanium Grade 2”. Journal of Engineering TribologyJ 0(0) (2018): 1-13.

[20] Bing Zhou, Xiaohong Jiang, Zhubo liu, Ruiqi Shen, Aleksandr V. Rogachev. “Preparation and characterization of TiO2 thin film by thermal oxidation of sputtered Ti film”. Materials Science in Semiconductor Processing 16 (2013): 513–519.

[21] Biswas, Amit, and Jyotsna Dutta Majumdar. "Surface characterization and mechanical property evaluation of thermally oxidized Ti-6Al-4V." Materials Characterization 60, no. 6 (2009): 513-518.

[22] Cui, W. F., and C. J. Shao. "The improved corrosion resistance and anti-wear performance of Zr–xTi alloys by thermal oxidation treatment." Surface and Coatings Technology 283 (2015): 101-107.

[23] Borgioli, F., E. Galvanetto, F. Iozzelli, and G. Pradelli. "Improvement of wear resistance of Ti–6Al–4V alloy by means of thermal oxidation." Materials Letters 59, no. 17 (2005): 2159-2162.

[24] L. Saldana, V. Barranco, J. L. Gonzalez-Carrasco, M. Rodr?guez, L. Munuera, N. Vilaboa. “Thermal oxidation enhances early interactions between human osteoblasts and alumina blasted Ti6Al4V alloy”. Journal of Biomedical Materials Research Part A (2006): 334-346.

[25] Zhang, Dongfang, Zhengbing Qi, Binbin Wei, and Zhoucheng Wang. "Low temperature thermal oxidation towards hafnium-coated magnesium alloy for biomedical application." Materials Letters 190 (2017): 181-184.

[26] Lieblich, Marcela, Sandra Barriuso, M. Multigner, Gaspar González-Doncel, and José Luis González-Carrasco. "Thermal oxidation of medical Ti6Al4V blasted with ceramic particles: Effects on the microstructure, residual stresses and mechanical properties." Journal of the mechanical behavior of biomedical materials 54 (2016): 173-184.

[27] Anio?ek, Krzysztof, Adrian Barylski, and Marian Kupka. "Modelling the structure and mechanical properties of oxide layers obtained on biomedical Ti-6Al-7Nb alloy in the thermal oxidation process." Vacuum 154 (2018): 309-314.

[28] Izman, S., M. A. Hassan, Mohammed Rafiq Abdul Kadir, M. R. Abdullah, Mahmood Anwar, A. Shah, and R. Daud. "Effect of pretreatment process on thermal oxidation of biomedical grade cobalt based alloy." In Advanced Materials Research, vol. 399, pp. 1564-1567. Trans Tech Publications, 2012.

[29] Niinomi, Mitsuo, Tomokazu Hattori, Keizo Morikawa, Toshihiro Kasuga, Akihiro Suzuki, Hisao Fukui, and Sigeo Niwa. "Development of low rigidity β-type titanium alloy for biomedical applications." Materials Transactions 43, no. 12 (2002): 2970-2977.

[30] Zhu, M. H., Z. B. Cai, W. Li, H. Y. Yu, and Z. R. Zhou. "Fretting in prosthetic devices related to human body." Tribology International 42, no. 9 (2009): 1360-1364.

[31] Mohsin T. Mohammed, Zahid A. Khan, and Arshad N. Siddiquee. “Influence of Microstructural Features on Wear Resistance of Biomedical Titanium Materials”. World Academy of Science, Engineering and Technology International Journal of Biomedical and Biological Engineering7,no.1 (2013): 49-53.

[32] Fayeulle, S. "Tribological behaviour of nitrogen-implanted materials." Wear 107, no. 1 (1986): 61-70.

[33] Yildiz, F., A. F. Yetim, A. Alsaran, and I. Efeoglu. "Wear and corrosion behaviour of various surface treated medical grade titanium alloy in bio-simulated environment." Wear 267, no. 5-8 (2009): 695-701.

[34] L. Capitanu, J. Onisoru, A. Iarovici, C. Tiganesteanu. “The orthopaedical endoprostheses durability”. Tribology in industry, Volume 30, No. 1&2 (2008): 23 – 32.

[35] Long, Marc, and H. J. Rack. "Titanium alloys in total joint replacement—a materials science perspective." Biomaterials 19, no. 18 (1998): 1621-1639.

[36] Komotori, Jun, B. J. Lee, H. Dong, and P. A. Dearnley. "Corrosion response of surface engineered titanium alloys damaged by prior abrasion." Wear 251, no. 1-12 (2001): 1239-1249.

[37] Bailey, Richard, and Yong Sun. "Unlubricated sliding friction and wear characteristics of thermally oxidized commercially pure titanium." Wear 308, no. 1-2 (2013): 61-70.

[38] Anio?ek, Krzysztof, Marian Kupka, and Adrian Barylski. "Sliding wear resistance of oxide layers formed on a titanium surface during thermal oxidation." Wear 356 (2016): 23-29.

[39] Hacisalioglu, I., F. Yildiz, A. Alsaran, and G. Purcek. "Wear behavior of the plasma and thermal oxidized Ti-15Mo and Ti-6Al-4V alloys." In IOP Conference Series: Materials Science and Engineering, vol. 174, no. 1, p. 012055. IOP Publishing, 2017.

[40] Dearnley, P. A., K. L. Dahm, and H. Çimeno?lu. "The corrosion–wear behaviour of thermally oxidised CP-Ti and Ti–6Al–4V." Wear 256, no. 5 (2004): 469-479.

[41] Liu, Xuanyong, Paul K. Chu, and Chuanxian Ding. "Surface modification of titanium, titanium alloys, and related materials for biomedical applications." Materials Science and Engineering: R: Reports 47, no. 3-4 (2004): 49-121.

[42] Resistance C. (2001). Application of Oxygen Ion Implantation to Titanium Surfaces?: Effects on Surface.

[43] Manivasagam, Geetha, Durgalakshmi Dhinasekaran, and Asokamani Rajamanickam. "Biomedical implants: corrosion and its prevention-a review." Recent patents on corrosion science (2010).

[44] Anio?ek, Krzysztof, Marian Kupka, and Adrian Barylski. "Characteristic of oxide layers obtained on titanium in the process of thermal oxidation." Archives of Metallurgy and Materials 61, no. 2 (2016): 853-856.

[45] Samal, Sneha, Sunghwan Cho, Dong Wha Park, and Hyungsun Kim. "Thermal characterization of titanium hydride in thermal oxidation process." Thermochimica acta 542 (2012): 46-51.

[46] Anio?ek, K., M. Kupka, A. Barylski, and G. Dercz. "Mechanical and tribological properties of oxide layers obtained on titanium in the thermal oxidation process." Applied Surface Science357 (2015): 1419-1426.

[47] Jamesh, M., Satendra Kumar, and TSN Sankara Narayanan. "Effect of thermal oxidation on corrosion resistance of commercially pure titanium in acid medium." Journal of materials engineering and performance 21, no. 6 (2012): 900-906.

[48] Somsanith, Nithideth, TSN Sankara Narayanan, Yu-Kyoung Kim, Il-Song Park, Tae-Sung Bae, and Min-Ho Lee. "Surface medication of Ti–15Mo alloy by thermal oxidation: Evaluation of surface characteristics and corrosion resistance in Ringer's solution." Applied Surface Science 356 (2015): 1117-1126.

[49] Wen, Ming, Cuie Wen, Peter Hodgson, and Yuncang Li. "Improvement of the biomedical properties of titanium using SMAT and thermal oxidation." Colloids and surfaces B: biointerfaces 116 (2014): 658-665.

[50] Sun, Qichun, Tianchang Hu, Hengzhong Fan, Yongsheng Zhang, and Litian Hu. "Thermal oxidation behavior and tribological properties of textured TC4 surface: Influence of thermal oxidation temperature and time." Tribology International 94 (2016): 479-489.

[51] Luo, Yong, Wenwen Chen, Maocai Tian, and Shuhua Teng. "Thermal oxidation of Ti6Al4V alloy and its biotribological properties under serum lubrication." Tribology International 89 (2015): 67-71.

[52] Jamesh, M., TSN Sankara Narayanan, and Paul K. Chu. "Thermal oxidation of titanium: Evaluation of corrosion resistance as a function of cooling rate." Materials Chemistry and Physics 138, no. 2-3 (2013): 565-572.

[53] Arslan, E., Y. Totik, E. Demirci, and A. Alsaran. "Influence of surface roughness on corrosion and tribological behavior of CP-Ti after thermal oxidation treatment." Journal of Materials Engineering and Performance 19, no. 3 (2010): 428-433.

 

 


This material may be protected under Copyright Act which governs the making of photocopies or reproductions of copyrighted materials.
You may use the digitized material for private study, scholarship, or research.

Back to previous page

Installed and configured by Bahagian Automasi, Perpustakaan Tuanku Bainun, Universiti Pendidikan Sultan Idris
If you have enquiries, kindly contact us at pustakasys@upsi.edu.my or 016-3630263. Office hours only.