Abdelwahab, M. A., Flynn, A., Chiou, B. S., Imam, S., Orts, W & Chiellini, E. (2012). Thermal,
mechanical and morphological characterization of plasticized PLA-PHB blends. Polymer
Degradation and Stability, 97(9), 1822-1828.
Adeosun, S. O., Lawal, G. I., Balogun, S. A & Akpan, E. I. (2012). Review of green polymer
nanocomposites. Journal of Minerals and Materials Characterization and Engineering, 11(04), 385.
Ahmed, J. & Varshney, S. K. (2011). Polylactides—chemistry, properties and green packaging
technology: a review. International Journal of Food Properties, 14(1), 37-58.
Ahmed, J., Varshney, S. K., Auras, R & Hwang, S. W. (2010). Thermal and rheological properties
of L?polylactide/polyethylene glycol/silicate nanocomposites films. Journal of Food
Science, 75(8), N97-N108.
Alberton, J., Martelli, S. M., Fakhouri, F. M & Soldi, V. (2014). Mechanical and
moisture barrier properties of titanium dioxide nanoparticles and halloysite nanotubes
reinforced polylactic acid (PLA). In IOP Conference Series: Materials Science and Engineering (Vol.
64, No. 1, p. 012010). IOP Publishing.
Ali, F. B., Awale, R. J., Fakhruldin, H & Anuar, H. (2016). Plasticizing poly (lactic acid) using
epoxidized palm oil for environmental friendly packaging material. Malaysian Journal of Analytical
Sciences, 20(5), 1153-1158.
Ali, F., Chang, Y. W., Kang, S. C & Yoon, J. Y. (2009). Thermal, mechanical and rheological
properties of poly (lactic acid)/epoxidized soybean oil blends. Polymer Bulletin,
62(1), 91-98.
Amass, W., Amass, A & Tighe, B. (1998). A review of biodegradable polymers: uses, current
developments in the synthesis and characterization of biodegradable polyesters, blends
of biodegradable polymers and recent advances in biodegradation studies. Polymer
international, 47(2), 89-144.
Anderson K. S., Schreck K. M & Hillmyer M. A. (2008). Toughening Polylactide, Polymer
Revision. 48, 85-108.
Anuar, H., Razali, M. S., Saidin, H. A., Hisham, A. F. B., Apandi, S. N. E. Z. M & Ali,
F. (2016). Tensile properties of durian skin fibre reinforced plasticized polylactic acid
biocomposites. International Journal of Engineering Materials and Manufacture, 1(1),
16-20.
Anuar, H., Izzati, A. N. F., Inani, S. S. N., E’zzati, M. S. N., Salimah, A. S. M., Ali, F., et al
(2017). Impregnation of Cinnamon Essential Oil into Plasticised Polylactic Acid Biocomposite Film
for Active Food Packaging. Journal of Packaging
Technology and Research, 1(3), 149-156.
Arjmandi, R., Hassan, A., Haafiz, M. M., Zakaria, Z & Inuwa, I. M. (2014).
Characterization of polylactic acid/microcrystalline cellulose/montmorillonite
hybrid composites. Malays J Anal Sci, 18, 642-650.
Armentano, I., Bitinis, N., Fortunati, E., Mattioli, S., Rescignano, N., Verdejo, R., et al
(2013). Multifunctional nanostructured PLA materials for packaging and tissue
engineering. Progress in Polymer Science, 38(10-11), 1720-1747.
Armentano, I., Fortunati, E., Burgos, N., Dominici, F., Luzi, F., Fiori, S., et al (2015).
Processing and characterization of plasticized PLA/PHB blends for
biodegradable multiphase systems. eXPRESS Polymer Letters, Vol 9(7), 583-596.
Arrieta, M.P., Samper, M.D., Aldas, M & López, J. (2017). On the use of PLA-PHB
Blends for Sustainable Food Packaging Applications. Materials, 10, 1008.
Arrieta, M. P., Fortunati, E., Dominici, F., López, J & Kenny, J. M. (2015).
Bionanocomposite films based on plasticized PLA–PHB/cellulose nanocrystal
blends. Carbohydrate polymers, 121, 265-275.
Arrieta, M. P., Castro-Lopez, M. D. M., Ray?n, E., Barral-Losada, L. F., L?pez-
Vilari?o, J. M., L?pez, J., et al (2014a). Plasticized poly (lactic acid)–poly
(hydroxybutyrate)(PLA–PHB) blends incorporated with catechin intended for
active food-packaging applications. Journal of agricultural and food
chemistry, 62(41), 10170-10180.
Arrieta, M. P., Fortunati, E., Dominici, F., Rayón, E., López, J & Kenny, J. M. (2014b).
Multifunctional PLA–PHB/cellulose nanocrystal films: Processing, structural
and thermal properties. Carbohydrate polymers, 107, 16-24.
Arrieta, M. P., Fortunati, E., Dominici, F., Rayón, E., López, J & Kenny, J. M. (2014c).
PLA-PHB/cellulose based films: Mechanical, barrier and disintegration
properties. Polymer Degradation and Stability, 107, 139-149.
Asadi, G. & Mousavi, S. M. (2006). Application of nanotechnology in food packaging.
In 13th World Congress of Food Science & Technology 2006 (pp. 739-739).
Athanasiou K. A., Niederauer G. G & Agrawal C. M. (1996). Sterilization, toxicity,
biocompatibility and clinical applications of polylactic acid/polyglycolic acid
copolymers. Biomaterials. 17, 93-102.
Auras, R., Harte, B & Selke, S. (2004). An overview of polylactides as packaging
materials. Macromolecular bioscience, 4(9), 835-864.
Avella, M., Buzarovska, A., Errico, M. E., Gentile, G & Grozdanov, A. (2009). Ecochallenges
of bio-based polymer composites. Materials, 2(3), 911-925.
Averous, L. & Le Digabel, F. (2006). Properties of biocomposites based on
lignocellulosic fillers. Carbohydrate polymers, 66(4), 480-493.
Averous, L. & Boquillon, N. (2004). Biocomposites based on plasticized starch:
thermal and mechanical behaviours. Carbohydrate polymers, 56(2), 111-122.
Averous, L., Fringant, C & Moro, L. (2001). Starch?based biodegradable materials
suitable for thermoforming packaging. Starch?Stärke, 53(8), 368-371.
Awale, R. J., Ali, F. B., Azmi, A. S., Puad, N. I. M., Anuar, H & Hassan, A. (2018).
Enhanced flexibility of biodegradable polylactic acid/starch blends using
epoxidized palm oil as plasticizer. Polymers, 10(9), 977.
Azizi Samir, M. A. S., Alloin, F & Dufresne, A. (2005). Review of recent research into
cellulosic whiskers, their properties and their application in nanocomposite
field. Biomacromolecules, 6(2), 612-626.
Baek, N., Kim, Y. T., Marcy, J. E., Duncan, S. E & O’Keefe, S. F. (2018). Physical
properties of nanocomposite polylactic acid films prepared with oleic acid
modified titanium dioxide. Food Packaging and Shelf Life, 17, 30-38.
Baiardo M., Frisoni G., Scandola M., Rimelen M., Lips D., Ruffieux K., et al (2003).
Thermal and mechanical properties of plasticized poly(L lactic acid). Journal of
Applied Polymer Science. 90(7), 1731-1738.
Bajpai, P. K., Singh, I & Madaan, J. (2014). Development and characterization of PLAbased
green composites: A review. Journal of Thermoplastic Composite
Materials, 27(1), 52-81.
Balakrishnan, H., Masoumi, I., Yussuf, A. A., Imran, M., Hassan, A & Wahit, M. U.
(2012). Ethylene copolymer toughened polylactic acid
nanocomposites. Polymer-Plastics Technology and Engineering, 51(1), 19-27.
Barrau, S., Vanmansart, C., Moreau, M., Addad. A., Stoclet, G., Lefebvre, J., et al
(2011). Crystallization behaviour of carbon nanotube-polylactide
nanocomposites. Macromolecules. 44(16), 6496-6502.
Behnajady, M. A., Eskandarloo, H., Modirshahla, N & Shokri, M. (2011). Investigation
of the effect of sol–gel synthesis variables on structural and photocatalytic
properties of TiO2 nanoparticles. Desalination, 278(1-3), 10-17.
Bodros, E., Pillin, I., Montrelay, N & Baley, C. (2007). Could biopolymers reinforced
by randomly scattered flax fibre be used in structural applications?. Composites
Science and Technology, 67(3-4), 462-470.
Bogaert, J. C. & Coszach, P. (2000). Poly (lactic acids): a potential solution to plastic
waste dilemma. Macromolecular symposia (Vol. 153, No. 1, pp. 287-303).
Weinheim: WILEY?VCH Verlag.
Bordes, P., Pollet, E & Avérous, L. (2009). Nano-biocomposites: biodegradable
polyester/nanoclay systems. Progress in Polymer Science, 34(2), 125-155.
Bouapao, L., Tsuji, H., Tashiro, K., Zhang, J & Hanesaka, M. (2009). Crystallization,
spherulite growth, and structure of blends of crystalline and amorphous poly
(lactide) s. Polymer, 50(16), 4007-4017.
Brody, A. L (2007). Case studies on nanotechnologies for food packaging. Food
technology, 07:102-107.
Buasri, A., Buranasing, G., Piemjaiswang, R., Yousatit, S & Loryuenyong, V. (2014).
Effect of titanium dioxide nanoparticles on mechanical and thermal properties of
poly (lactic acid) and poly (butylene succinate) blends. Advances in Science and
Technology (Vol. 96, pp. 33-38). Trans Tech Publications.
Burgos, N., Tolaguera, D., Fiori, S & Jiménez, A. (2014). Synthesis and
characterization of lactic acid oligomers: Evaluation of performance as poly
(lactic acid) plasticizers. Journal of Polymers and the Environment, 22(2), 227-
235.
Buzarovska, A (2013). PLA nanocomposites with functionalized TiO2 nanoparticles.
Polymer-Plastics Technology and Engineering, 52(3), 280-286.
Buzarovska, A. & Grozdanov, A. (2012). Biodegradable poly(L-lactic acid)/TiO2
nanocomposites: thermal properties and degradation. Journal of Applied Polymer
Science. 123:2187-2193.
Cagri, A., Ustunol, Z & Ryser, E. T. (2004). Antimicrobial edible films and
coatings. Journal of food protection, 67(4), 833-848.
Campoccia, D., Visai, L., Renò, F., Cangini, I., Rizzi, M., Poggi, A., et al (2015).
Bacterial adhesion to poly?(d, l) lactic acid blended with vitamin E: Toward
gentle anti?infective biomaterials. Journal of Biomedical Materials Research
Part A, 103(4), 1447-1458.
Cao, X., Dong, H & Li, C. M. (2007). New nanocomposite materials reinforced with
flax cellulose nanocrystals in waterborne
polyurethane. Biomacromolecules, 8(3), 899-904.
Cargnello, M., Gordon, T. R & Murray, C. B. (2014). Solution-phase synthesis of
titanium dioxide nanoparticles and nanocrystals. Chemical reviews, 114(19),
9319-9345.
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X & Auras, R. (2016). Poly
(lactic acid)—Mass production, processing, industrial applications, and end of
life. Advanced drug delivery reviews, 107, 333-366.
Cha, D. S. & Chinnan, M. S. (2004). Biopolymer-based antimicrobial packaging: a
review. Critical reviews in food science and nutrition, 44(4), 223-237.
Chandra, R. & Rustgi, R. (1998). Biodegradable polymers. Progress in polymer
science, 23, 1273-1335.
Chang, J. H., An, Y. U., Cho, D & Giannelis, E. P. (2003). Poly (lactic acid)
nanocomposites: comparison of their properties with montmorillonite and synthetic
mica (II). Polymer, 44(13), 3715-3720.
Chaudhry, Q., Scotter, M., Blackburn, J., Ross, B., Boxall, A., Castle, L., et al (2008).
Applications and implications of nanotechnologies for the food sector. Food additives and
contaminants, 25(3), 241-258.
Chen, C. C., Chueh, J. Y., Tseng, H., Huang, H. M & Lee, S. Y. (2003). Preparation and
characterization of biodegradable PLA polymeric blends.
Biomaterials, 24(7), 1167-1173.
Chen, C., Lv, G., Pan, C., Song, M., Wu, C., Guo, D., et al (2007).
Poly (lacticacid)(PLA) based nanocomposites—a novel way of drug- releasing.
Biomedical materials, 2(4), L1.
Chen, L. & Dou, Q. (2019). Influence of the combination of nucleating agent and
plasticizer on the non-isothermal crystallization kinetics and activation energies of poly (lactic
acid). Journal of Thermal Analysis and Calorimetry, 1-22.
Chen, X. & Mao, S. S. (2007). Titanium dioxide nanomaterials: synthesis, properties, modifications,
and applications. Chemical reviews, 107(7), 2891-2959.
Chen, Y., Yao, X., Gu, Q & Pan, Z. (2013). Non-isothermal crystallization kinetics of poly
(lactic acid)/graphene nanocomposites. Journal of Polymer Engineering, 33(2),
163-171.
Chieng, B., Ibrahim, N., Yunus, W & Hussein, M. (2014a). Poly (lactic acid)/poly
(ethylene glycol) polymer nanocomposites: effects of graphene
nanoplatelets. Polymers, 6(1), 93-104.
Chieng, B., Ibrahim, N., Then, Y & Loo, Y. (2014b). Epoxidized vegetable oils
plasticized poly (lactic acid) biocomposites: mechanical, thermal and
morphology properties. Molecules, 19(10), 16024-16038.
Chow, W. S., Leu, Y. Y & Ishak, Z. M. (2014). Poly (lactic acid) nanocomposites with improved
impact and thermal properties. Journal of Composite Materials, 48(2), 155-163.
Clarinval, A. M, & Halleux, J. (2005). Classification of biodegradable polymers. In Biodegradable
polymers for industrial applications (pp. 3-31). Woodhead Publishing.
Cohn, D. & Salomon, A. H. (2005). Designing biodegradable multiblock PCL/PLA thermoplastic
elastomers. Biomaterials, 26(15), 2297-2305.
Conte, A., Longano, D., Costa, C., Ditaranto, N., Ancona, A., Cioffi, N., et al (2013). A novel
preservation technique applied to fiordilatte cheese. Innovative food
science & emerging technologies, 19, 158-165.
Costa, R. G., Brichi, G. S., Ribeiro, C & Mattoso, L. H. (2016). Nanocomposite fibers
of poly (lactic acid)/titanium dioxide prepared by solution blow
spinning. Polymer Bulletin, 73(11), 2973-2985.
Costa, R. G., Ribeiro, C & Mattoso, L. H. (2013). Study of the effect of rutile/anatase
TiO2 nanoparticles synthesized by hydrothermal route in electrospun PVA/TiO2
nanocomposites. Journal of Applied Polymer Science, 127(6), 4463-4469.
Costa, R. G., Ribeiro, C & Mattoso, L. H. (2010). Morphological and photocatalytic
properties of PVA/TiO2 nanocomposite fibers produced by electrospinning.
Journal of nanoscience and nanotechnology, 10(8), 5144-5152.
Courgneau, C., Domenek, S., Guinault, A., Avérous, L & Ducruet, V. (2011). Analysis
of the structure-properties relationships of different multiphase systems based on
plasticized poly (lactic acid). Journal of Polymers and the Environment, 19(2),
362-371.
Dasgupta, N., Ranjan, S., Mundekkad, D., Ramalingam, C., Shanker, R & Kumar, A.
(2015). Nanotechnology in agro-food: from field to plate. Food Research
International, 69, 381-400.
De Azeredo, H. M (2009). Nanocomposites for food packaging applications. Food
research international, 42(9), 1240-1253.
Di Gioia, L., Cuq, B & Guilbert, S. (1999). Thermal properties of corn gluten meal and
its proteic components. International journal of biological
macromolecules, 24(4), 341-350.
Di Lorenzo, M. L (2005). Crystallization behavior of poly (L-lactic acid). European
Polymer Journal, 41(3), 569-575.
Di Maio, L., Scarfato, P., Milana, M. R., Feliciani, R., Denaro, M., Padula, G., et al
(2014). Bionanocomposite polylactic acid/organoclay films: Functional
properties and measurement of total and lactic acid specific migration. Packaging
Technology and Science, 27(7), 535-547.
Dil, E. J., Virgilio, N & Favis, B. D. (2016). The effect of the interfacial assembly of
nano-silica in poly (lactic acid)/poly (butylene adipate-co-terephthalate) blends
on morphology, rheology and mechanical properties. European Polymer
Journal, 85, 635-646.
Dorgan, J. R., Lehermeier, H & Mang, M. (2000). Thermal and rheological properties
of commercial-grade poly (lactic acid). Journal of Polymers and the
Environment, 8(1), 1-9.
Doyle, M. E (2006). Nanotechnology: a brief literature review. Food Research Institute,
UW-Madison.
Duncan, T. V (2011). Applications of nanotechnology in food packaging and food
safety: barrier materials, antimicrobials and sensors. Journal of colloid and
interface science, 363(1), 1-24.
Ebadi-Dehaghani, H., Barikani, M., Khonakdar, H. A & Jafari, S. H. (2015).
Microstructure and non-isothermal crystallization behavior of PP/PLA/clay
hybrid nanocomposites. Journal of Thermal Analysis and Calorimetry, 121(3),
1321-1332.
Eguiburu, J. L., Iruin, J. J., Fernandez-Berridi, M. J & San Roman, J. (1998). Blends of
amorphous and crystalline polylactides with poly (methyl methacrylate) and poly
(methyl acrylate): a miscibility study. Polymer, 39(26), 6891-6897.
Famá, L., Gerschenson, L & Goyanes, S. (2009). Starch-vegetable fibre composites to
protect food products. Carbohydrate polymers, 75(2), 230-235.
Fan, C., Plaxco, K. W & Heeger, A. J. (2002). High-efficiency fluorescence quenching
of conjugated polymers by proteins. Journal of the American Chemical
Society, 124(20), 5642-5643.
Farah, S., Anderson, D. G & Langer, R. (2016). Physical and mechanical properties of
PLA, and their functions in widespread applications—A comprehensive
review. Advanced drug delivery reviews, 107, 367-392.
Fenollar, O., García, D., Sánchez, L., López, J & Balart, R. (2009). Optimization of the
curing conditions of PVC plastisols based on the use of an epoxidized fatty acid
ester plasticizer. European Polymer Journal, 45(9), 2674-2684.
Finkenstadt V. L., Liu C. K., Cooke P. H., Liu L. S & Willett J. L. (2008). Mechanical
Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid)
Green Composites Using Acoustic Emission and Confocal Microscopy. Journal
of Polymers and the Environment. 16(1), 19-26.
Flory, P. J (1953). Principles of polymer chemistry. Cornell University Press.
Fortunati, E., Armentano, I., Zhou, Q., Puglia, D., Terenzi, A., Berglund, L. A., et al
(2012). Microstructure and nonisothermal cold crystallization of PLA composites
based on silver nanoparticles and nanocrystalline cellulose. Polymer degradation
and stability, 97(10), 2027-2036.
Foruzanmehr, M., Vuillaume, P. Y., Elkoun, S & Robert, M. (2016). Physical and
mechanical properties of PLA composites reinforced by TiO2 grafted flax
fibers. Materials & Design, 106, 295-304.
Fujishima, A., Rao, T. N & Tryk, D. A. (2000). Titanium dioxide
photocatalysis. Journal of photochemistry and photobiology C: Photochemistry
reviews, 1(1), 1-21.
Garlotta, D. (2001). A literature review of poly (lactic acid). Journal of Polymers and
the Environment, 9(2), 63-84.
Ge H., Yang F., Hao Y., Wu G., Zhang H & Dong L. (2013). Thermal, mechanical, and
rheological properties of plasticized poly(L-lactic acid). Journal of Applied
Polymer Science. 127(4), 2832-2839.
Gil, N., Saska, M & Negulescu, I. (2006). Evaluation of the effects of biobased
plasticizers on the thermal and mechanical properties of poly (vinyl
chloride). Journal of applied polymer science, 102(2), 1366-1373.
Guan, J. & Hanna, M. A. (2006). Selected morphological and functional properties of
extruded acetylated starch–cellulose foams. Bioresource Technology, 97(14),
1716-1726.
Guigo, N., Vincent, L., Mija, A., Naegele, H & Sbirrazzuoli, N. (2009). Innovative
green nanocomposites based on silicate clays/lignin/natural fibres. Composites
Science and Technology, 69(11-12), 1979-1984.
Gumiero, M., Peressini, D., Pizzariello, A., Sensidoni, A., Iacumin, L., Comi, G., et al
(2013). Effect of TiO2 photocatalytic activity in a HDPE-based food packaging
on the structural and microbiological stability of a short-ripened cheese. Food
chemistry, 138(2-3), 1633-1640.
Gurunathan, T., Mohanty, S & Nayak, S. K. (2015). A review of the recent
developments in biocomposites based on natural fibres and their application
perspectives. Composites Part A: Applied Science and Manufacturing, 77, 1-25.
Gutierrez?Villarreal, M. H. & Rodríguez?Velazquez, J. (2007). The effect of citrate
esters as plasticizers on the thermal and mechanical properties of poly (methyl
methacrylate). Journal of applied polymer science, 105(4), 2370-2375.
Han, Q., Wang, Y., Shao, C., Zheng, G., Li, Q & Shen, C. (2014). Nonisothermal
crystallization kinetics of biodegradable poly(lactic acid)/zinc
phenylphosphonate composites. Journal of Composite Matter. 48(22), 2737-
2746.
Harte, I., Birkinshaw, C., Jones, E., Kennedy, J & DeBarra, E. (2012). The effect of
citrate ester plasticizers on the thermal and mechanical properties of poly(DLlactide).
Journal of Applied Polymer Science. 1-7.
Hartmann, M. H (1998). High molecular weight polylactic acid polymers. Biopolymers
from renewable resources (pp. 367-411). Springer, Berlin, Heidelberg.
Henton, D. E., Gruber, P., Lunt, J & Randall, J. (2005). Polylactic acid
technology. Natural fibers, biopolymers, and biocomposites, 16, 527-577.
Huang, H. D., Ren, P. G., Xu, J. Z., Xu, L., Zhong, G. J., Hsiao, B. S., et al (2014).
Improved barrier properties of poly (lactic acid) with randomly dispersed
graphene oxide nanosheets. Journal of Membrane Science, 464, 110-118.
Huang, Z. M., Zhang, Y. Z., Kotaki, M & Ramakrishna, S. (2003). A review on polymer
nanofibers by electrospinning and their applications in
nanocomposites. Composites science and technology, 63(15), 2223-2253.
Heydari, A., Alemzadeh, I & Vossoughi, M. (2013). Functional properties of
biodegradable corn starch nanocomposites for food packaging
applications. Materials & Design, 50, 954-961.
Huski?, M. & ?igon, M. (2007). PMMA/MMT nanocomposites prepared by one-step
in situ intercalative solution polymerization. European Polymer Journal, 43(12),
4891-4897.
Immergut, E. H. & Mark, H. F. (1965). Principles of plasticization. Plasticization and
plasticizer processes, 48, 1-26.
Imre, B. & Pukánszky, B. (2013). Compatibilization in bio-based and biodegradable
polymer blends. European polymer journal, 49(6), 1215-1233.
Ingrao, C., Tricase, C., Cholewa-Wójcik, A., Kawecka, A., Rana, R & Siracusa, V.
(2015). Polylactic acid trays for fresh-food packaging: A Carbon Footprint
assessment. Science of the Total Environment, 537, 385-398.
Jacobsen, S. & Fritz, H. G. (1996). Filling of poly (lactic acid) with native
starch. Polymer Engineering & Science, 36(22), 2799-2804.
Jacobsen, S., Fritz, H. G., Degée, P., Dubois, P. H & Jérôme, R. (1999). Polylactide
(PLA)—a new way of production. Polymer Engineering & Science, 39(7), 1311-
1319.
Jacobsen, S. & Fritz, H. G. (1999). Plasticizing polylactide—the effect of different
plasticizers on the mechanical properties. Polymer Engineering & Science, 39(7),
1303-1310.
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M & Desobry, S. (2010).
Poly-lactic acid: production, applications, nanocomposites, and release
studies. Comprehensive Reviews in Food Science and Food Safety, 9(5), 552-
571.
Jorda-Beneyto, M., Ortuño, N., Devis, A., Aucejo, S., Puerto, M., Gutiérrez-Praena, D.,
et al (2014). Use of nanoclay platelets in food packaging materials: technical and
cytotoxicity approach. Food Additives & Contaminants: Part A, 31(3), 354-363.
Kang, H., Li, Y., Gong, M., Guo, Y., Guo, Z., Fang, Q., et al (2018). An
environmentally sustainable plasticizer toughened polylactide. RSC advances,
8(21), 11643-11651.
Kelnar, I., Kratochvíl, J., Kaprálková, L., Zhigunov, A & Nevoralová, M. (2017).
Graphite nanoplatelets-modified PLA/PCL: Effect of blend ratio and nanofiller
localization on structure and properties. Journal of the mechanical behavior of
biomedical materials, 71, 271-278.
Kerry, J. P., O’grady, M. N & Hogan, S. A. (2006). Past, current and potential
utilisation of active and intelligent packaging systems for meat and muscle-based
products: A review. Meat science, 74(1), 113-130.
Khanam, P. N. & AlMaadeed, M. A. (2014). Improvement of ternary recycled polymer
blend reinforced with date palm fibre. Materials & Design, 60, 532-539.
Kim, H. S., Park, B. H., Choi, J. H & Yoon, J. S. (2008). Mechanical properties and
thermal stability of poly (L?lactide)/calcium carbonate composites. Journal of
applied polymer science, 109(5), 3087-3092.
Kobashi, K., Villmow, T., Andres, T & Pötschke, P. (2008). Liquid sensing of meltprocessed
poly (lactic acid)/multi-walled carbon nanotube composite
films. Sensors and Actuators B: Chemical, 134(2), 787-795.
Kratochvíl, J. & Kelnar, I. (2017). Non-isothermal kinetics of cold crystallization in
multicomponent PLA/thermoplastic polyurethane/nanofiller system. Journal of
Thermal Analysis and Calorimetry, 130(2), 1043-1052.
Kumar, R., Singh, T & Singh, H. (2015). Natural fibers polymeric composites with
particulate fillers–A review report. Int. J. Adv. Eng. Res. Appl, 1, 22-29.
Kumar, V., Tyagi, L & Sinha, S. (2011). Wood flour–reinforced plastic composites: a
review. Reviews in chemical engineering, 27(5-6), 253-264.
Kuswandi, B. & Moradi, M. (2019). Improvement of Food Packaging Based on
Functional Nanomaterial. Nanotechnology: Applications in Energy, Drug and
Food (pp. 309-344). Springer, Cham.
Kuswandi, B (2017). Environmental friendly food nano-packaging. Environmental
Chemistry Letters, 15(2), 205-221.
Labrecque, L.V., Kumar, R.A., Dave, V., Gross, R.A & McCarthy, S.P. (1997). Citrate
esters as plasticizers for poly(lactic acid). Journal of Applied Polymer Science.
66(8), 1507-1513.
Lagarón, J. M (2011). Polylactic acid (PLA) nanocomposites for food packaging
applications. Multifunctional and Nanoreinforced Polymers for Food
Packaging (pp. 485-497). Woodhead Publishing.
Lai, J. C. H., Rahman, M. & Hamdan, S. (2015). Physical, mechanical, and thermal
analysis of polylactic acid/fumed silica/clay (1.28 E)
nanocomposites. International Journal of Polymer Science, 2015.
Lee, J. H., Park, T. G., Park, H. S., Lee, D. S., Lee, Y. K., Yoon, S. C., et al (2003).
Thermal and mechanical characteristics of poly (L-lactic acid) nanocomposite
scaffold. Biomaterials, 24(16), 2773-2778.
Lee, S. H. & Wang, S. (2006). Biodegradable polymers/bamboo fiber biocomposite
with bio-based coupling agent. Composites Part A: Applied Science and
Manufacturing, 37(1), 80-91.
Lei, Wu. C., Zhang, M. Q., Rong, M. Z & Friedrich, K. (2005). Silica nanoparticles
filled polypropylene: effects of particle surface treatment, matrix ductility and
particle species on mechanical performances of the composites. Composites
Science and Technology. 65(3-4), 635-645.
Lei, Y., Wu, Q., Yao, F & Xu, Y. (2007). Preparation and properties of recycled
HDPE/natural fiber composites. Composites Part A: applied science and
manufacturing, 38(7), 1664-1674.
Li, C., Dou, Q., Bai, Z & Lu, Q. (2015). Non-isothermal crystallization behaviors and
spherulitic morphology of poly (lactic acid) nucleated by a novel nucleating
agent. Journal of Thermal Analysis and Calorimetry, 122(1), 407-417.
Li, J., He, Y & Inoue, Y. (2003). Thermal and mechanical properties of biodegradable
blends of poly (L?lactic acid) and lignin. Polymer International, 52(6), 949-955.
Li, J., Luo, X & Lin, X. (2013). Preparation and characterization of hollow glass
microsphere reinforced poly (butylene succinate) composites. Materials &
Design, 46, 902-909.
Li, S. D. & Huang, L. (2008). Pharmacokinetics and biodistribution of
nanoparticles. Molecular pharmaceutics, 5(4), 496-504.
Lim, L. T., Auras, R & Rubino, M. (2008). Processing technologies for poly (lactic
acid). Progress in polymer science, 33(8), 820-852.
Lim, L. T., Cink, K & Vanyo, T. (2010). Processing of poly (lactic acid). Poly (Lactic
Acid) Synthesis, Structures, Properties, Processing, and Applications, 189-215.
Liu, D., Zhong, T., Chang, P. R., Li, K & Wu, Q. (2010). Starch composites reinforced
by bamboo cellulosic crystals. Bioresource technology, 101(7), 2529-2536.
Liu, H. & Zhang, J. (2011). Research progress in toughening modification of poly
(lactic acid). Journal of polymer science part B: Polymer Physics, 49(15), 1051-
1083.
Ljungberg, N., Colombini, D & Wesslén, B. (2005). Plasticization of poly (lactic acid)
with oligomeric malonate esteramides: Dynamic mechanical and thermal film
properties. Journal of Applied Polymer Science, 96(4), 992-1002.
Ljungberg, N. & Wesslen, B. (2003). Tributyl citrate oligomers as plasticizers for poly
(lactic acid): thermo-mechanical film properties and aging. Polymer, 44(25),
7679-7688.
Ljungberg N. & Wesslén B. (2002). The effects of plasticizers on the dynamic
mechanical and thermal propertiesof poly(lactic acid). Journal of Applied
Science. 86, 1227-1234.
Llorens, A., Lloret, E., Picouet, P. A., Trbojevich, R & Fernandez, A. (2012). Metallicbased
micro and nanocomposites in food contact materials and active food
packaging. Trends in Food Science & Technology, 24(1), 19-29.
Lopez-Rubio, A., Almenar, E., Hernandez-Muñoz, P., Lagarón, J. M., Catalá, R &
Gavara, R. (2004). Overview of active polymer-based packaging technologies for
food applications. Food Reviews International, 20(4), 357-387.
Lunt, J (1998). Large-scale production, properties and commercial applications of
polylactic acid polymers. Polymer degradation and stability, 59(1-3), 145-152.
Maiti, P., Yamada, K., Okamoto, M., Ueda, K & Okamoto, K. (2002). New
polylactide/layered silicate nanocomposites: role of organoclays. Chemistry of
materials, 14(11), 4654-4661.
Maiza, M., Benaniba, M. T., Quintard, G & Massardier-Nageotte, V. (2015). Biobased
additive plasticizing Polylactic acid (PLA). Polimeros, 25(6), 581-590.
Majdzadeh-Ardakani, K. & Sadeghi-Ardakani, S. (2010). Experimental Investigation
Of Mechanical Properties Of Starch/Natural Rubber/Clay
Nanocomposites. Digest Journal of Nanomaterials & Biostructures
(DJNB), 5(2).
Man, C., Zhang, C., Liu, Y., Wang, W., Ren, W., Jiang, L., et al (2012). Poly (lactic
acid)/titanium dioxide composites: preparation and performance under ultraviolet
irradiation. Polymer degradation and stability, 97(6), 856-862.
Mangaraj, S., Yadav, A., Bal, L. M., Dash, S. K & Mahanti, N. K. (2019). Application
of biodegradable polymers in food packaging industry: a comprehensive
review. Journal of Packaging Technology and Research, 3(1), 77-96.
Marra, A., Silvestre, C., Kujundziski, A. P., Chamovska, D & Duraccio, D. (2017).
Preparation and characterization of nanocomposites based on PLA and TiO2
nanoparticles functionalized with fluorocarbons. Polymer Bulletin, 74(8), 3027-
3041.
Mathur, M. & Hira, M. A. (2008). Specialty Fibres-IV: Poly Lactic Acid
Fibres. Man-Made Textiles in India, 51(7).
Mehta, R., Kumar, V., Bhunia, H & Upadhyay, S. N. (2005). Synthesis of poly (lactic
acid): a review. Journal of Macromolecular Science, Part C: Polymer
Reviews, 45(4), 325-349.
Mekonnen, T., Mussone, P., Khalil, H & Bressler, D. (2013). Progress in bio-based
plastics and plasticizing modifications. Journal of Materials Chemistry A, 1(43),
13379-13398.
Mhlanga, N. & Ray, S. S. (2014). Characterisation and thermal properties of titanium
dioxide nanoparticles-containing biodegradable polylactide composites
synthesized by sol–gel method. Journal of nanoscience and
nanotechnology, 14(6), 4269-4277.
Mihindukulasuriya, S. D. F. & Lim, L. T. (2014). Nanotechnology development in food
packaging: A review. Trends in Food Science & Technology, 40(2), 149-167.
Miller, G. & Senjen, R. (2008). Out of the Laboratory and onto our Plates:
Nanotechnology in Food & Agriculture. A report prepared for Friends of the
Earth Australia. Friends of the Earth Europe and Friends of the Earth United
States and supported by Friends of the Earth Germany. Friends of the Earth
Australia Nanotechnology Project, Australia.
Mo, S. D. & Ching, W. Y. (1995). Electronic and optical properties of three phases of
titanium dioxide: Rutile, anatase, and brookite. Physical Review B, 51(19),
13023.
Mohanty, A. K., Misra, M. A & Hinrichsen, G. I. (2000). Biofibres, biodegradable
polymers and biocomposites: An overview. Macromolecular materials and
Engineering, 276(1), 1-24.
Mustapa, I. R., Czajka, M., Chandran, S., Daud, N., Kong, I & Shanks, R. A. (2016).
Crystallization Behavior Of Plasticized Poly (Lactic Acid)-Hemp
Nanocomposites. Polymers Research Journal, 10(4), 199.
Mustapa, I. R. & Shanks, R. A. (2014). Multiple melting behavior of poly (lactic acid)-
hemp-silica composites using modulated-temperature differential scanning
calorimetry. Journal of Polymer Engineering, 34(9), 895-903.
Mustapa, I. R., Chandran, S., Shanks, R. A & Kong, I. (2014). Non-isothermal
Crystallization of Poly (lactic acid)-Hemp-Silica Nanocomposites Plasticized
with Tributyl Citrate. In 37th Annual Condensed Matter and Materials Meeting
(pp. 33-36). Australian Institute of Physics.
Mustapa, I. R., Shanks, R. A & Kong, I. (2013a). Melting behaviour and dynamic
mechanical properties of Poly (lactic acid)-hemp-nanosilica composites. Asian
Transactions on Basic and Applied Sciences, 3(2), 29-37.
Mustapa, I., Shanks, R & Kong, I. (2013b). Poly (lactic acid)-hemp-nanosilica hybrid
composites: thermomechanical, thermal behavior and morphological properties.
International Journal of Advanced Science and Engineering Technology, 3(1),
192-199.
Mustapa, I. R. & Shanks, R. A. (2012). Dynamic Mechanical Properties and Melting
Behaviour of Poly (Lactic Acid)–Hemp–Nanosilica Hybrid Composites. In Proc.
15th European Conference on Composite Materials.
Nafchi, A. M., Nassiri, R., Sheibani, S., Ariffin, F & Karim, A. A. (2013). Preparation
and characterization of bionanocomposite films filled with nanorod-rich zinc
oxide. Carbohydrate polymers, 96(1), 233-239.
Nagarajan, V., Mohanty, A. K & Misra, M. (2016). Perspective on Polylactic Acid
(PLA) based Sustainable Materials for Durable Applications: Focus on
Toughness and Heat Resistance. ACS Sustainable Chemistry and Engineering, 4,
2899−2916.
Nair, L. S. & Laurencin, C. T. (2007). Biodegradable polymers as
biomaterials. Progress in polymer science, 32(8-9), 762-798.
Nampoothiri, K. M., Nair, N. R & John, R. P. (2010). An overview of the recent
developments in polylactide (PLA) research. Bioresource technology, 101(22),
8493-8501.
Nomai, J., Suksut, B & Schlarb, A. K. (2015). Crystallization behavior of poly (lactic
acid)/titanium dioxide nanocomposites. KMUTNB International Journal of
Applied Science and Technology, 8, 251-258.
Ohkita, T. & Lee, S. H. (2006). Thermal degradation and biodegradability of poly
(lactic acid)/corn starch biocomposites. Journal of applied polymer
science, 100(4), 3009-3017.
Ojijo, V., Sinha Ray, S & Sadiku, R. (2012a). Effect of nanoclay loading on the thermal
and mechanical properties of biodegradable polylactide/poly [(butylene
succinate)-co-adipate] blend composites. ACS applied materials &
interfaces, 4(5), 2395-2405.
Ojijo, V., Sinha Ray, S & Sadiku, R. (2012b). Role of specific interfacial area in
controlling properties of immiscible blends of biodegradable polylactide and poly
[(butylene succinate)-co-adipate]. ACS applied materials & interfaces, 4(12),
6690-6701.
Ozkoc, G. & Kemaloglu, S. (2009). Morphology, biodegradability, mechanical, and
thermal properties of nanocomposite films based on PLA and plasticized
PLA. Journal of Applied Polymer Science, 114(4), 2481-2487.
Pan, H., Xu, D., Liu, Q., Ren, H. Q & Zhou, M. (2014). Preparation and characterization
of corn starch-nanodiamond composite films. Applied Mechanics and
Materials (Vol. 469, pp. 156-161). Trans Tech Publications.
Pandey, J. K., Chu, W. S., Lee, C. S & Ahn, S. H. (2007). Preparation characterization
and performance evaluation of nanocomposites from natural fiber reinforced
biodegradable polymer matrix for automotive applications. International
Symposium on Polymers and the Environment: Emerging Technology and
Science, BioEnvironmental Polymer Society (BEPS).
Papageorgiu, GZ., Achilias, DS., Nanaki, S., Beslikas, T & Bikiaris, D. (2010). PLA
nanocomposites: effect of filler type on non-isothermal crystallization.
Thermochim Acta.;511:129–38.
Park, E. S., Kim, M. N & Yoon, J. S. (2002). Grafting of polycaprolactone onto poly
(ethylene?co?vinyl alcohol) and application to polyethylene?based bioerodable
blends. Journal of Polymer Science Part B: Polymer Physics, 40(22), 2561-2569.
Paul, M. A., Delcourt, C., Alexandre, M., Degée, P., Monteverde, F., Rulmont, A., et
al (2005). (Plasticized) polylactide/(organo?) clay nanocomposites by in situ
intercalative polymerization. Macromolecular Chemistry and physics, 206(4),
484-498.
Paul, M. A., Alexandre, M., Degée, P., Calberg, C., Jérôme, R & Dubois, P. (2003).
Exfoliated Polylactide/Clay Nanocomposites by In?Situ Coordination–Insertion
Polymerization. Macromolecular rapid communications, 24(9), 561-566.
Petersen, K., Nielsen, P. V., Bertelsen, G., Lawther, M., Olsen, M. B., Nilsson, N. H.,
et al (1999). Potential of biobased materials for food packaging. Trends in food
science & technology, 10(2), 52-68.
Phetwarotai, W., Potiyaraj, P & Aht?Ong, D. (2012). Characteristics of biodegradable
polylactide/gelatinized starch films: Effects of starch, plasticizer, and
compatibilizer. Journal of Applied Polymer Science, 126(S1), E162-E172.
Pillai, S. K., Ray, S. S., Scriba, M., Ojijo, V & Hato, M. J. (2013). Morphological and
thermal properties of photodegradable biocomposite films. Journal of Applied
Polymer Science, 129(1), 362-370.
Pillin, I., Montrelay, N., Bourmaud, A & Grohens, Y. (2008). Effect of thermomechanical
cycles on the physico-chemical properties of poly (lactic acid).
Polymer Degradation and Stability, 93(2), 321-328.
Pluta M. & Galeski A. (2002). Crystalline and supermolecular structure of polylactide
in relation to the crystallization method. Journal of Applied Polymer Science.
86(6), 1386-1395.
Pluta, M., Galeski, A., Alexandre, M., Paul, M. A & Dubois, P. (2002).
Polylactide/montmorillonite nanocomposites and microcomposites prepared by
melt blending: structure and some physical properties. Journal of Applied
Polymer Science, 86(6), 1497-1506.
Pogodina, N. V., Cerclé, C., Avérous, L., Thomann, R., Bouquey, M & Muller, R.
(2008). Processing and characterization of biodegradable polymer
nanocomposites: detection of dispersion state. Rheologica Acta, 47(5-6), 543-
553.
Qin, Y., Yang, J., Yuan, M., Xue, J., Chao, J., Wu, Y., et al (2014). Mechanical, barrier,
and thermal properties of poly (lactic acid)/poly (trimethylene carbonate)/talc
composite films. Journal of Applied Polymer Science, 131(6).
Raquez, J. M., Habibi, Y., Murariu, M & Dubois, P. (2013). Polylactide (PLA)-based
nanocomposites. Progress in Polymer Science, 38(10-11), 1504-1542.
Rasal R. M. & Hirt D. E. (2008) Toughness decrease of PLA-PHBHHx blend films
upon surface-confined photopolymerization. Journal of Biomedical Materials
Research Part-A. 88(4), 1079-1086.
Ratanakamnuan, U. & Aht?Ong, D. (2006). Preparation and characterization of lowdensity
polyethylene/banana starch films containing compatibilizer and
photosensitizer. Journal of applied polymer science, 100(4), 2717-2724.
Ray, S. S. & Bousmina, M. (2006). Biodegradable polymer/layered silicate
nanocomposites. In Polymer Nanocomposites (pp. 57-129). Woodhead
Publishing.
Ray, S. S. & Bousmina, M. (2005). Biodegradable polymers and their layered silicate
nanocomposites: in greening the 21st century materials world. Progress in
materials science, 50(8), 962-1079.
Ren, Z., Dong, L & Yang, Y. (2006). Dynamic mechanical and thermal properties of
plasticized poly (lactic acid). Journal of Applied Polymer Science, 101(3), 1583-
1590.
Rhim, J. W., Mohanty, A. K., Singh, S. P & Ng, P. K. (2006). Effect of the processing
methods on the performance of polylactide films: Thermocompression versus
solvent casting. Journal of applied polymer science, 101(6), 3736-3742.
Rhim, J. W., Park, H. M & Ha, C. S. (2013). Bio-nanocomposites for food packaging
applications. Progress in polymer science, 38(10-11), 1629-1652.
Rhim, J. W., Hong, S. I & Ha, C. S. (2009). Tensile, water vapor barrier and
antimicrobial properties of PLA/nanoclay composite films. LWT-Food Science
and Technology, 42(2), 612-617.
Righetti, M. C., Cinelli, P., Mallegni, N., Massa, C. A., Bronco, S., Stäbler, A., et al
(2019). Thermal, Mechanical, and Rheological Properties of Biocomposites
Made of Poly (lactic acid) and Potato Pulp Powder. International journal of
molecular sciences, 20(3), 675.
Rostami, A., Nazockdast, H & Karimi, M. (2016). Graphene induced microstructural
changes of PLA/MWCNT biodegradable nanocomposites: rheological,
morphological, thermal and electrical properties. RSC Advances, 6(55), 49747-
49759.
Rydz, J., Musio?, M., Zawidlak-W?grzy?ska, B & Sikorska, W. (2018). Present and
future of biodegradable polymers for food packaging applications. Biopolymers
for Food Design (pp. 431-467). Academic Press.
Samadi, S., Moradkhani, M., Beheshti, H., Irani, M & Aliabadi, M. (2018). Fabrication
of chitosan/poly (lactic acid)/graphene oxide/TiO2 composite nanofibrous
scaffolds for sustained delivery of doxorubicin and treatment of lung
cancer. International journal of biological macromolecules, 110, 416-424.
Scheirs, J., Camino, G & Tumiatti, W. (2001). Overview of water evolution during the
thermal degradation of cellulose. European Polymer Journal, 37(5), 933-942.
Sejidov, F. T., Mansoori, Y & Goodarzi, N. (2005). Esterification reaction using solid
heterogeneous acid catalysts under solvent-less condition. Journal of Molecular
Catalysis A: Chemical, 240(1-2), 186-190.
Sears, J. K. & Darby, J. R. (1982). Mechanism of plasticizer action. The Technology of
Plasticizers, 35-77.
Shankar, S. & Rhim, J. W. (2018). Bionanocomposite films for food packaging
applications. Reference module in food science, 1-10.
Shankar, S. & Rhim, J. W. (2016). Polymer nanocomposites for food packaging
applications. Functional and physical properties of polymer nanocomposites, 29.
Shi, N. & Dou, Q. (2015). Non-isothermal cold crystallization kinetics of poly (lactic
acid)/poly (butylene adipate-co-terephthalate)/treated calcium carbonate
composites. Journal of Thermal Analysis and Calorimetry, 119(1), 635-642.
Shirai, M. A., Grossmann, M. V. E., Mali, S., Yamashita, F., Garcia, P. S & Müller, C.
M. O. (2013). Development of biodegradable flexible films of starch and poly
(lactic acid) plasticized with adipate or citrate esters. Carbohydrate Polymers,
92(1), 19-22.
Shtarkman, B. P. & Razinskaya, I. N. (1983). Plasticization mechanism and structure
of polymers. Acta polymerica, 34(8), 514-520.
Shyang, C. W. & Kuen, L. S. (2008). Flexural, morphological and thermal properties
of poly (lactic acid)/organo-montmorillonite nanocomposites. Polymers and
Polymer Composites, 16(4), 263-270.
Silverajah, V. S., Ibrahim, N. A., Zainuddin, N., Yunus, W. M. Z. W & Hassan, H. A.
(2012). Mechanical, thermal and morphological properties of poly (lactic
acid)/epoxidized palm olein blend. Molecules, 17(10), 11729-11747.
Silvestre, C., Duraccio, D & Cimmino, S. (2011). Food packaging based on polymer
nanomaterials. Progress in polymer science, 36(12), 1766-1782.
Singh, S., Maspoch, M. L & Oksman, K. (2019). Crystallization of triethyl?citrateplasticized
poly (lactic acid) induced by chitin nanocrystals. Journal of Applied
Polymer Science, 136(36), 47936.
Singla, R. K., Maiti, S. N & Ghosh, A. K. (2016). Mechanical, morphological, and
solid-state viscoelastic responses of poly (lactic acid)/ethylene-co-vinyl-acetate
super-tough blend reinforced with halloysite nanotubes. Journal of Materials
Science, 51(22), 10278-10292.
Sinha J., K., PandeyD., Rutot P.D & Dubois P. (2003). Biodegradation of poly (ε-
caprolactone)/starch blends and composites in composting and culture
environment: the effect of compatibilization on the inherent biodegradability of
the host polymer. Carbohydrates Research. 338, 1759-1769.
Sinha Ray, S., Okamoto, K., Yamada, K & Okamoto, M. (2002a). Novel porous
ceramic material via burning of polylactide/layered silicate nanocomposite. Nano
Letters, 2(4), 423-425.
Sinha Ray, S., Yamada, K., Okamoto, M & Ueda, K. (2002b). Polylactide-layered
silicate nanocomposite: a novel biodegradable material. Nano Letters, 2(10),
1093-1096.
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K & Ueda, K. (2002c). New
polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and
properties. Macromolecules, 35(8), 3104-3110.
Smijs, T. G. & Pavel, S. (2011). Titanium dioxide and zinc oxide nanoparticles in
sunscreens: focus on their safety and effectiveness. Nanotechnology, science and
applications, 4, 95.
Siracusa, V., Rocculi, P., Romani, S & Dalla Rosa, M. (2008). Biodegradable polymers
for food packaging: a review. Trends in Food Science & Technology, 19(12),
634-643.
Snejdrova, E. & Dittrich, M. (2012). Pharmaceutical applications of plasticized
polymers. Recent advances in plasticizers. IntechOpen.
Södergård, A. & Stolt, M. (2002). Properties of lactic acid based polymers and their
correlation with composition. Progress in polymer science, 27(6), 1123-1163.
Song, M., Pan, C., Li, J., Wang, X & Gu, Z. (2006). Electrochemical study on
synergistic effect of the blending of nano TiO2 and PLA polymer on the
interaction of antitumor drug with DNA. Electroanalysis: An International
Journal Devoted to Fundamental and Practical Aspects of
Electroanalysis, 18(19? 20), 1995-2000.
Sorrentino, A., Gorrasi, G & Vittoria, V. (2007). Potential perspectives of bionanocomposites
for food packaging applications. Trends in food science &
technology, 18(2), 84-95.
Sothornvit, R. & Krochta, J. M. (2005). Plasticizers in edible films and coatings.
In Innovations in food packaging (pp. 403-433). Academic Press.
Sothornvit, R. & Krochta, J. M. (2001). Plasticizer effect on mechanical properties of
β-lactoglobulin films. Journal of Food Engineering, 50(3), 149-155.
Sozer, N. & Kokini, J. L. (2009). Nanotechnology and its applications in the food
sector. Trends in biotechnology, 27(2), 82-89.
Sullivan, E. M., Karimineghlani, P., Naraghi, M., Gerhardt, R. A & Kalaitzidou, K.
(2016). The effect of nanofiller geometry and compounding method on polylactic
acid nanocomposite films. European Polymer Journal, 77, 31-42.
Su, Z., Li, Q., Liu, Y., Hu, G. H & Wu, C. (2009). Multiple melting behavior of poly
(lactic acid) filled with modified carbon black. Journal of Polymer Science Part
B: Polymer Physics, 47(20), 1971-1980.
Tang, X. Z., Kumar, P., Alavi, S & Sandeep, K. P. (2012). Recent advances in
biopolymers and biopolymer-based nanocomposites for food packaging
materials. Critical reviews in food science and nutrition, 52(5), 426-442.
Tang, X., Alavi, S & Herald, T. J. (2008). Barrier and mechanical properties of starchclay
nanocomposite films. Cereal chemistry, 85(3), 433-439.
Teixeira, E. D. M., Pasquini, D., Curvelo, A. A., Corradini, E., Belgacem, M. N &
Dufresne, A. (2009). Cassava bagasse cellulose nanofibrils reinforced
thermoplastic cassava starch. Carbohydrate polymers, 78(3), 422-431.
Tham, W. L., Mohd Ishak, Z. A & Chow, W. S. (2014). Mechanical and thermal
properties enhancement of poly (lactic acid)/halloysite nanocomposites by
maleic-anhydride functionalized rubber. Journal of Macromolecular Science,
Part B, 53(3), 371-382.
Thuy, N. T., Duc, V. M & Liem, N. T. (2018). Properties of poly (lactic acid) plasticized
by epoxidized rubber seed oil. Vietnam Journal of Chemistry, 56(2), 181-186.
Tsuji, H., Takai, H & Saha, S.K. (2006). Isothermal and non-isothermal crystallization
behaviour of poly(l-lactic acid): Effects of stereocomplex as nucleating agent.
Polymer, 47(11), 3826-3837.
Tsuji, H. & Yamada, T. (2003). Blends of aliphatic polyesters. VIII. Effects of poly (Llactide?
co?ε?caprolactone) on enzymatic hydrolysis of poly (L?lactide), poly (ε?
caprolactone), and their blend films. Journal of applied polymer science, 87(3),
412-419.
Tsuji, H. & Ikada, Y. (2000). Properties and morphology of poly (L-lactide) 4. Effects
of structural parameters on long-term hydrolysis of poly (L-lactide) in phosphatebuffered
solution. Polymer Degradation and Stability, 67(1), 179-189.
Väisänen, T., Das, O & Tomppo, L. (2017). A review on new bio-based constituents
for natural fiber-polymer composites. Journal of Cleaner Production, 149, 582-
596.
Vieira, M. G. A., da Silva, M. A., dos Santos, L. O & Beppu, M. M. (2011).
Natural-based plasticizers and biopolymer films: A review. European Polymer
Journal, 47(3), 254-263.
Venugopal, J. & Ramakrishna, S. (2005). Applications of polymer nanofibers in
biomedicine and biotechnology. Applied biochemistry and biotechnology,
125(3), 147-157.
Vermeiren, L., Devlieghere, F., van Beest, M., de Kruijf, N & Debevere, J. (1999).
Developments in the active packaging of foods. Trends in food science &
technology, 10(3), 77-86.
Vignon, M. R., Dupeyre, D & Garcia-Jaldon, C. (1996). Morphological
characterization of steam-exploded hemp fibers and their utilization in
polypropylene-based composites. Bioresource Technology, 58(2), 203-215.
Vink, E. T. & Davies, S. (2015). Life cycle inventory and impact assessment data for
2014 Ingeo™ polylactide production. Industrial Biotechnology, 11(3), 167-180.
Wang, G., Zhang, J & Murray, R. W. (2002). DNA binding of an ethidium intercalator
attached to a monolayer-protected gold cluster. Analytical chemistry, 74(17),
4320-4327.
Wang, L. F. & Rhim, J. W. (2016). Grapefruit seed extract incorporated antimicrobial
LDPE and PLA films: Effect of type of polymer matrix. LWT, 74, 338-345.
Wang, N., Zhang, X., Ma, X & Fang, J. (2008). Influence of carbon black on the
properties of plasticized poly(lactic acid) composites. Polymer Degradation and
Stability. 93(6), 1044-1052.
Wen, X., Lin, Y., Han, C., Zhang, K., Ran, X., Li, Y., et al (2009). Thermomechanical
and optical properties of biodegradable poly(L-lactide)/silica nanocomposites by
melt compounding. Journal of Applied Polymer Science. 114(6), 3379-3388.
Wu, D., Lin, D., Zhang, J., Zhou, W., Zhang, M., Zhang, Y., et al (2011). Selective
localization of nanofillers: effect on morphology and crystallization of PLA/PCL
blends. Macromolecular Chemistry and Physics, 212(6), 613-626.
Wu, W., Wu, G & Zhang, H. (2017). Effect of wood flour as nucleating agent on the
isothermal crystallization of poly (lactic acid). Polymers for Advanced
Technologies, 28(2), 252-260.
Xiao, H., Lu, W & Yeh, J. T. (2009). Effect of plasticizer on the crystallization behavior
of poly (lactic acid). Journal of applied polymer science, 113(1), 112-121.
Yamada, K., Ueda, K., Ray, S. S & Okamoto, M. (2002). Preparation and properties of
polylactide/layered silicate nanocomposite. Kobunshi ronbunshu
(Tokyo), 59(12), 760-766.
Yam, K. L., Takhistov, P. T & Miltz, J. (2005). Intelligent packaging: concepts and
applications. Journal of food science, 70(1), R1-R10.
Yang, C. S., Chang, C. H., Tsai, P. J., Chen, W. Y., Tseng, F. G & Lo, L. W. (2004).
Nanoparticle-based in vivo investigation on blood− brain barrier permeability
following ischemia and reperfusion. Analytical chemistry, 76(15), 4465-4471.
Yasuniwa, M., Sakamo, K., Ono, Y & Kawahara, W. (2008). Melting behavior of poly
(l-lactic acid): X-ray and DSC analyses of the melting process. Polymer, 49(7),
1943-1951.
Yasuniwa, M., Tsubakihara, S., Sugimoto, Y & Nakafuku, C. (2004). Thermal analysis
of the double?melting behavior of poly (L?lactic acid). Journal of Polymer
Science Part B: Polymer Physics, 42(1), 25-32.
Yee, Y. Y., Ching, Y. C., Rozali, S., Hashim, N. A & Singh, R. (2016). Preparation and
characterization of poly (lactic acid)-based composite reinforced with oil palm
empty fruit bunch fiber and nanosilica. BioResources, 11(1), 2269-2286.
Yu, F., Liu, T., Zhao, X., Yu, X., Lu, A & Wang, J. (2012). Effects of talc on the
mechanical and thermal properties of polylactide. Journal of Applied Polymer
Science. 125 (S2), E99-E109.
Yu, L., Dean, K & Li, L. (2006). Polymer blends and composites from renewable
resources. Progress in polymer science, 31(6), 576-602.
Zabihzadeh, S. M (2010). Water uptake and flexural properties of natural filler/HDPE
composites. BioResources, 5(1), 316-232.
Zhang, J., Lou, J., Ilias, S., Krishnamachari, P & Yan, J. (2008). Thermal properties of
poly (lactic acid) fumed silica nanocomposites: experiments and molecular
dynamics simulations. Polymer, 49(9), 2381-2386.
Zhang, L., Xiong, C & Deng, X. (1996). Miscibility, crystallization and morphology of
poly (β-hydroxybutyrate)/poly (d, l-lactide) blends. Polymer, 37(2), 235-241.
Zhang, M. & Thomas, N. L. (2011). Blending polylactic acid with
polyhydroxybutyrate: the effect on thermal, mechanical, and biodegradation
properties. Advances in Polymer Technology, 30(2), 67-79.
Zhang, Q., Li, D., Zhang, H., Su, G & Li, G. (2018). Preparation and properties of poly
(lactic acid)/sesbania gum/nano-TiO2 composites. Polymer Bulletin, 75(2), 623-
635.
Zhao, J. L., Pan, H. W., Yang, H. L., Bian, J. J., Zhang, H. L., Gao, G., et al (2019).
Studies on Rheological, Thermal, and Mechanical Properties of
Polylactide/Methyl Methacrylate-Butadiene-Styrene Copolymer/Poly (propylene
carbonate) Polyurethane Ternary Blends. Chinese Journal of Polymer Science,
1-10.
Zhao, Y. Q., Cheung, H. Y., Lau, K. T., Xu, C. L., Zhao, D. D & Li, H. L. (2010).
Silkworm silk/poly (lactic acid) biocomposites: Dynamic mechanical, thermal
and biodegradable properties. Polymer degradation and stability, 95(10), 1978-
1987.
Zhijun, Q., Xingxiang, Z., Ning, W & Jianming, F. (2009). Poly(1,3-butylene adipate)
plasticized poly(lactic acid)/carbon black as electrical conductive polymer
composites. Polymer Composites. 30(11), 1576-1584.
Zhuang, W., Zhang, J., Liu, J., Zhang, Q., Hu, B & Shen, J. (2008). Preparation and
characterization of nano-TiO2/polylactide composites. Acta Mater. Compos.
Sinica, 25, 8-11.