UPSI Digital Repository (UDRep)
|
UPSI Digital Repository (UDRep)
|
|
|
| ||||||||||||||||||||||||||
| Abstract : Universiti Pendidikan Sultan Idris |
| This work aims to study the effect of mechanical treatment technique on titanium coated with PVD for the enhancement of corrosion resistance for the biomedical implant. First, substrates were coated with TiN via PVD then applied the mechanical treatment through ultrasonic vibration. Results show that all coated samples treated with ultrasonic vibration improve the surface of the coated sample and produce a compact coating as compared with a substrate coated without mechanical treatment. The corrosion test evaluated by Potentiodynamic polarization and Electrochemical Impedance Spectroscopy indicated that all coated samples treated with mechanical treatment showed high corrosion resistance as compared with the untreated sample. It can be concluded that mechanical treatment which is a simple technic can be used as an alternative to improve the corrosion resistance thus reduce the implant and manufacturing cost for biomedical applications. ? Published under licence by IOP Publishing Ltd. |
| References |
Abitha, H., Kavitha, V., Gomathi, B., & Ramachandran, B. (2020). A Recent Investigation on Shape Memory Alloys and Polymers Based Materials on Bio Artificial Implants-Hip and Knee Joint Materials Today Proceedings, Retrieved from www.scopus.com Alwan, A. S., & Jaddoa, A. A. (2020). Effect of thermochemical and mechanical surface treatments on metallographic of biomaterial stainless steel grad 316l. Journal of Mechanical Engineering Research and Developments, 43(3), 312-320. Retrieved from www.scopus.com Filipović, U., Dahmane, R. G., Ghannouchi, S., Zore, A., & Bohinc, K. (2020). Bacterial adhesion on orthopedic implants. Advances in Colloid and Interface Science, 283 doi:10.1016/j.cis.2020.102228 Hafeez, M. A., Inam, A., Ul Hassan, M., Umer, M. A., Usman, M., & Hanif, A. (2020). Optimized corrosion performance of AISI 1345 steel in hydrochloric acid through thermo–mechanical cyclic annealing processes. Crystals, 10(4) doi:10.3390/cryst10040265 Marković, I., Grekulović, V., Vujasinović, M. R., & Mladenović, S. (2020). Influence of thermo-mechanical treatment on the electrochemical behavior of cast and sintered dilute Cu–Au alloy. Journal of Alloys and Compounds, 831 doi:10.1016/j.jallcom.2020.154726 Mas-Ayu, H., Izman, S., Abdul-Kadir, M. R., Daud, R., Shah, A., Yusoff, M. F. M., . . . Kamarul, T. (2014). Influence of carbon concentrations in reducing co and cr ions release in cobalt based implant: A preliminary report doi:10.4028/www.scientific.net/AMR.845.462 Retrieved from www.scopus.com Rahimi, S., & Marrow, T. J. (2020). A new method for predicting susceptibility of austenitic stainless steels to intergranular stress corrosion cracking. Materials and Design, 187 doi:10.1016/j.matdes.2019.108368 Satendra Kumar, Kumar, A., Chakradhar, I., Manjini, S., & Reddy, S. L. V. P. (2019). Corrosion resistance behavior of Cr–Cu alloyed thermo-mechanically treated reinforced bars in 3.5% NaCl solution. Protection of Metals and Physical Chemistry of Surfaces, 55(3), 554-565. doi:10.1134/S2070205119030201 Shah, A., Izman, S., Abdul-Kadir, M. R., Mas Ayu, H., Anwar, M., & Ma'aram, A. (2014). Influence of bias voltage on corrosion resistance of TiN coated on biomedical TiZrNb alloy doi:10.4028/www.scientific.net/AMR.845.436 Retrieved from www.scopus.com Shah, A., Izman, S., Abdul-Kadir, M. R., & Mas-Ayu, H. (2017). Influence of substrate temperature on adhesion strength of TiN coating of biomedical Ti–13Zr–13Nb alloy. Arabian Journal for Science and Engineering, 42(11), 4737-4742. doi:10.1007/s13369-017-2647-3 Shah, A., Izman, S., & Hassan, M. A. (2016). Influence of nitrogen flow rate in reducing tin microdroplets on biomedical TI-13ZR-13NB alloy. Jurnal Teknologi, 78(5-10), 6-10. doi:10.11113/jt.v78.8825 Thirumavalavan, K., Chandrasekhar, S. C., Abeens, M., Muruganandhan, R., & Muthu Manickam, M. A. (2019). Study on the influence of process parameters of severe surface mechanical treatment process on the surface properties of AA7075 T651 using TOPSIS and taguchi analysis. Materials Research Express, 6(11) doi:10.1088/2053-1591/ab522f Toboła, D., Morgiel, J., & Maj. (2020). TEM analysis of surface layer of ti-6Al-4V ELI alloy after slide burnishing and low-temperature gas nitriding. Applied Surface Science, 515 doi:10.1016/j.apsusc.2020.145942 |
| This material may be protected under Copyright Act which governs the making of photocopies or reproductions of copyrighted materials. You may use the digitized material for private study, scholarship, or research. |