UPSI Digital Repository (UDRep)
|
UPSI Digital Repository (UDRep)
|
|
|
| Total records found : 2 |
| Simplified search suggestions : Fizam Zainon |
| 1 | 2016 Article | Study of wear properties of Aluminum Alloy 332 at difference sliding distance Zainon Fizam, Daud Ruslizam, Ahmad Khairel Rafezi, 2024 hits |
| 2 | 2015 Article | Study on hardness and wear of aluminum aa332.0 composites reinforced Mg2 Si via stir casting: a review Fizam Zainon Aluminum alloy AlSi12CuFe (AA332.0) is use as matrix material and Mg2Si (_ 10 _ 15 _m) as reinforcement will study. Composites containing of 15wt. % and reinforcement develop by stirring casting route. The ingot alloy melts in a graphite crucible in an electric furnace at 750_C _ 5_C. This molten stir for 45 minutes and the Mg2Si particles will add inside the vortex during stirring. After completion of the particle feeding, the molten will re-melt in the same temperature for another 15 minutes. The molten finely pours into the metal mould and allowed to solidify at room temperature. Full heat treatments will provide for the samples; solution treatment consist of heating in an electrical furnace at 500_C (_1_C) for 5 hours and then quenching in water at room temperature. The aging treatment shall be done at 170_C for 2 hours. Hardness analysis conducts by following the ASTM E384 _ 09 using a Vickers hardness tester. The wear tests conduct using a pin on disc sliding wear testing machine..... 3 hits |
